Efi live emissions

**clix813** · 01-02-2011, 07:19 AM

Hey everyone new here. I just picked up a 99 ss camaro with the t56. Now my problem is the owner before never needed to pass emissions so he has lt headers no cats air and egr delete. Not just the plate that blocks it its completly gone. My questions is I have an efi live and am wondering what exactly to do to make it so that it can pass the obII test. I know this is possible just dont really know where to start.

**Sweet Chops** · 01-02-2011, 07:47 AM

I have HP Tuners and all I need to to is check the DTCs to no error reported for the codes I want to delete. I would turn off all AIR, EGR, and rear O2 codes if I were you. I'm not sure how EFI Live has it in there program but I bet it is similar.

Ryan

**clix813** · 01-02-2011, 08:40 AM

That's what I've been kinda reading but to my understanding if you set it to X it will show not ready? But if set to no mil it will flag the code when checked I believe? Cause idealy you want it to be X and set to no mil. I'm just kinda confused.

**Sweet Chops** · 01-02-2011, 10:04 AM

0 - MIL on first error
1 - MIL on second error
2 - No MIL light
3 - No Error Reported

These are my options. I set it to #3. I'm thinking you should set it to an X.

**alian** · 01-02-2011, 04:33 PM

Originally Posted by Sweet Chops

0 - MIL on first error
1 - MIL on second error
2 - No MIL light
3 - No Error Reported

These are my options. I set it to #3. I'm thinking you should set it to an X.

What codes are coming up??
In efi live it is,in DTC TYPE.
Only the following values may be entered into this table:
- X: Not Reported
- A: 1 Trip, Emissions Related
- B: 2 Trips, Emissions Related
- C: Non Emissions.
Then in the Only the following values may be entered into this table:
- No MIL
- MIL
DTC MILL section you have the choice of.

So maybe go X and then No Mill.
That is for the E38s not sure if your is different.
Cheers Ian

**Sweet Chops** · 01-03-2011, 08:21 AM

Originally Posted by alian

What codes are coming up??
In efi live it is,in DTC TYPE.
Only the following values may be entered into this table:
- X: Not Reported
- A: 1 Trip, Emissions Related
- B: 2 Trips, Emissions Related
- C: Non Emissions.
Then in the Only the following values may be entered into this table:
- No MIL
- MIL
DTC MILL section you have the choice of.

So maybe go X and then No Mill.
That is for the E38s not sure if your is different.
Cheers Ian

I would agree with you alian