Results 1 to 11 of 11
Thread: whats needed for a 9 inch
-
03-10-2008, 04:57 PM #1
whats needed for a 9 inch
I was wondering what is absolutely necessary to do a 9 inch swap...I had a shop do it and ive been having issues with the rearend like noisy gears but he keeps saying I need this and that
-
03-10-2008, 05:03 PM #2
- Join Date
- Jun 2007
- Location
- Lathrop, Missouri
- Posts
- 2,482
NBM / Silver- 00 SS / 71 SS Elcamino
You will need a conversion u-joint, 2ea 3" exhaust clamps to mount the sway bar, your old Brake Backing plates from your 10 bolt. Not too bad of a install but you will need to "pound" the sheetmetal up around where your torque arm mounts for the torque arm to clear.
I would recomend Motive Performance gears. They are strong and Quiet.2000 SS Camaro Heads, Large cam, Fast 90, 9"w/430's and locker, yada yada yada... you get the picture
1971 SS ElCamino 402 Big Block 550HP
2006 Silverado 2500HD 496 cubic inches of pure muscle
-
03-10-2008, 06:48 PM #3
My cars has been whining on the highway pretty damn loud and the guy keeps saying its because of the stock u joint but I thought the stock u joint and torque arm would only cause vibrations not whine...also the sway bar is hitting the differential a slight bit
he says i need to change the torque arm also and sway bar
-
03-11-2008, 08:35 PM #4
-
03-11-2008, 09:19 PM #5
- Join Date
- Oct 2007
- Location
- Beaver Dam KY
- Posts
- 7,745
79 T/A -91 Firebird- 1998 Trans Am -Oynx Black
Its your gears not your u-joint that is whining. Ujoints usally clunk and smack.. in my case that is..
BUMP for more help btw
-
03-12-2008, 11:58 AM #6
yea I was telling him that its the gears that are whining not the u joint!!i hope he takes car of it because im going to be picking her up today...
plus have any of you guys has issues with sway bar clearence also?Last edited by JattGunMan; 03-12-2008 at 03:01 PM.
-
03-12-2008, 12:00 PM #7
- Join Date
- Aug 2005
- Location
- Thornton, CO
- Posts
- 23,773
Red Tint Jewelcoat- 2008 Trailblazer SS
$2500
-
03-12-2008, 03:02 PM #8
I already payed the 2500 plus install and what not but the guy doesnt want to fix the gear whine...should I buy a u joint and then maybe hell fix it
-
03-12-2008, 05:11 PM #9
- Join Date
- Aug 2005
- Location
- Thornton, CO
- Posts
- 23,773
Red Tint Jewelcoat- 2008 Trailblazer SS
How bad is the whine?
Any suspension pieces as well??
-
03-12-2008, 05:15 PM #10
well the whine is louder than my exhaust cutout ,veryy annoying...no suspension parts..
-
03-13-2008, 09:13 AM #11
- Join Date
- Aug 2005
- Location
- Thornton, CO
- Posts
- 23,773
Red Tint Jewelcoat- 2008 Trailblazer SS
Lowered?
Or stock height?
Where did you buy the rear from?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
So whats needed in a cam install?
By 95camaroZNC in forum General HelpReplies: 1Last Post: 02-04-2010, 11:22 PM -
Whats needed for 383 Stroker Swap?
By Patsy57 in forum Firebird / WS6Replies: 11Last Post: 03-26-2008, 05:50 PM -
whats needed for a t56 upgrade
By Qwk94Z28 in forum Manual TransmissionReplies: 0Last Post: 01-07-2008, 08:47 AM -
Whats needed for 7k redline?
By stevegrizzle in forum Internal EngineReplies: 15Last Post: 06-24-2007, 09:36 PM -
whats the widest tire i can fit on a 8 inch rim?
By 98tadriver in forum Wheels and TiresReplies: 2Last Post: 12-16-2005, 11:24 AM
Bookmarks