T/A diff. cover gasket?

**Acceleration Junky** · 03-11-2008, 04:14 PM

Does the T/A diff. cover require any specific gasket other than a stock one? Any advice on creating a good seal would be appreciated also. Thanks in advance.

**thearborbarber** · 03-11-2008, 05:06 PM

It should come with one. If not I have used a felpro for a 7.5 inch 10 bolt (stock) with success

**Wesman** · 03-11-2008, 05:49 PM

Originally Posted by Acceleration Junky

Does the T/A diff. cover require any specific gasket other than a stock one? Any advice on creating a good seal would be appreciated also. Thanks in advance.

Just make sure the surface is clean (use brake clean) and use the gasket by itself, no gasket maker needed.

**Fury_786** · 03-15-2008, 06:05 PM

should come with one, but a stocker works fine

**Acceleration Junky** · 03-16-2008, 03:40 AM

Thanks again. I actually wanted to use a fel pro but wasn't sure if I should use the gasket that TA sells for it. Should I even bother with taking the cover off or should I continue to just drain, flush, and refill? The cover has been undisturbed since it's initial install 4 years ago. No leaks either.