Results 1 to 8 of 8
Thread: rear noise when I turned
-
02-16-2008, 03:18 PM #1
- Join Date
- Jan 2008
- Location
- France
- Posts
- 17
pewter- 2001 Z28
rear noise when I turned
I have a growl when I left turns without accelerate. Noise come from the rear.
If I accelerates: no noise
If I turned at right: no noise
an idea ?
Excuse me for my English, I'm FrenchLast edited by SilverSyde; 02-24-2008 at 02:45 PM.
-
02-24-2008, 02:44 PM #2
- Join Date
- Jan 2008
- Location
- France
- Posts
- 17
pewter- 2001 Z28
-
02-25-2008, 02:13 PM #3
not to alarm u , but my rear made a slight growl for a while before it blew
-
02-26-2008, 06:47 AM #4
- Join Date
- Jan 2008
- Location
- France
- Posts
- 17
pewter- 2001 Z28
ok, and which are repairs which you made
-
02-26-2008, 07:25 AM #5
- Join Date
- Aug 2005
- Location
- Crystal Lake IL
- Age
- 47
- Posts
- 2,517
Pewter- 2001 Camaro Z28 M6
if the rear is making a howling noise, yeah its bout to go.
1. check a make sure you have full fluid (pinion seals leak on these cars, not worth fixing)
2. check your u-joints
3. pull the pumpkin cover check magnet for metal shavings, inspect gears and backlash
3. if the rearend goes, its usually the spider gears in the carrier that crap out.
to fix it, replace the posi carrier, but clean out the axle housing extremely well to make sure no metal debris is still in there.
or best bet is buy a 12 bolt or 9inch
my factory 10 bolt has always howled and made a clicking noise when I turn left. Its still going and has lasted 70xxx miles, with many tracks passes with over 400rwhp M6.
I just got lucky that it never blew up. most people dont.
-
02-26-2008, 07:29 AM #6
-
02-26-2008, 10:24 AM #7
- Join Date
- May 2007
- Location
- virginia
- Age
- 54
- Posts
- 168
navy blue metallic- 2000 z28 camaro
Sounds Like Possibly The Differential Unit Is Going Out Pull The Cover And Look For Chunks
4.10 RICHMOND GEARS,LAKEWOOD LCA'S,EATON POSI,EDELBROCK TORQUE ARM,
LAKEWOOD PANHARD BAR,SLP LID,,B&M RIPPER SHIFTER,EDELBROCK STRUT TOWER BRACE,SLP FAN CONTROL,SLP LINE LOCK,17 INCH ZR1S WITH 315 35S AND 275 40S,SLP Y-PIPE,TSP 224/224 112LSA CAM,COMP SPRINGS,TUNED BY FROST @ LSXTUNE.COM
-
02-26-2008, 10:25 AM #8
- Join Date
- May 2007
- Location
- virginia
- Age
- 54
- Posts
- 168
navy blue metallic- 2000 z28 camaro
I Highly Recommend The Eaton Posi Unit Ive Had Mine In For 6 Months And It Gets Launched Hard Also Use The Ta Stud Kit And Girdle
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Rear End Noise
By nasdag in forum DrivetrainReplies: 4Last Post: 06-21-2010, 10:22 AM -
Question: rear end noise
By Brad(WS/Z0.6) in forum DrivetrainReplies: 12Last Post: 02-13-2009, 12:45 PM -
whining noise when A/C is turned on
By y2kformula in forum Firebird / WS6Replies: 9Last Post: 10-29-2008, 10:23 PM -
Help: whining noise when A/C is turned on
By y2kformula in forum General HelpReplies: 3Last Post: 10-26-2008, 03:33 PM -
Rear End Noise
By gp_wanna_be in forum Manual TransmissionReplies: 1Last Post: 04-22-2007, 04:46 PM
Bookmarks