Results 1 to 20 of 20
Thread: Rear end
-
01-26-2011, 04:33 PM #1
- Join Date
- Jun 2006
- Location
- Walker, La.
- Age
- 57
- Posts
- 14
White- 2001Camaro SS Convertible
Rear end
who makes a good bolt in rear end for a 2001 camaro SS?
-
01-26-2011, 08:06 PM #2
Midwest Chassis (MWC), Dana, Moser, Strange
-
01-31-2011, 08:57 PM #3
-
02-22-2011, 08:32 AM #4
- Join Date
- Aug 2006
- Location
- NC
- Posts
- 258
mystic- 95 LS, yes it says LS
Any price on how much they run?
-
02-22-2011, 09:28 AM #5
- Join Date
- Jan 2010
- Location
- East of Cleveland, Ohio
- Posts
- 3,827
Black- 99 WS.6 - Modified
Depending on the options, around $2k and up.
-
02-22-2011, 03:06 PM #6
-
02-22-2011, 03:48 PM #7
Moser 12 bolt with 3.73 gears, True Trac, 33 spline axles, welded sway bar brackets, welded relocation brackets, and 4 channel ABS in bare steel was $2,800.
-
02-22-2011, 07:57 PM #8
Base price for a MWC is the same price
-
03-23-2011, 08:14 PM #9
my mechanic likes jasper.
-
03-24-2011, 05:12 AM #10
Jasper makes remanufactured rear ends. I've never heard of anyone running one in our cars.
-
03-24-2011, 05:52 AM #11
im running a moser 12bolt 33 spline true trac 3 channel and it was 2500 or so and i beat the crap out of it
-
03-24-2011, 05:50 PM #12
-
03-24-2011, 06:38 PM #13
yes that all do lol....
and i hate moser after my 9 inch.... over 3300 and they for got parts in the kit... and fighing to get them next day. BS
i went a little over kill.
if ur running a stick with there stuff check ur wheel studs i bent mine
-
03-29-2011, 04:00 PM #14
I run a Moser 9" w/ 3.75 gears and trac loc diff.
Moser 9" for a 6 speed, 12 bolt for auto.
-
03-29-2011, 04:01 PM #15
-
03-31-2011, 01:17 PM #16
-
04-03-2011, 08:09 PM #17
-
05-18-2011, 06:28 AM #18
- Join Date
- Aug 2005
- Location
- Crystal Lake IL
- Age
- 47
- Posts
- 2,517
Pewter- 2001 Camaro Z28 M6
Strange Dana S60... Its what I installed in my 01 z28 m6.
fully setup with 4.10 for $2200. I did the install.
Add some more $$$ for the shortend chromoly driveshaft.
-
05-18-2011, 06:38 AM #19
-
05-18-2011, 06:38 AM #20
- Join Date
- Aug 2005
- Location
- Crystal Lake IL
- Age
- 47
- Posts
- 2,517
Pewter- 2001 Camaro Z28 M6
Another thing to note.... Dana 60 even the one by strange, replacement parts can be found easily and are usually fairly cheap.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Rear LS1 98-02 Rear Disc Backing Plates/Calipers/Brackets
By peetsjunkie in forum Parts Wanted / TradeReplies: 2Last Post: 10-02-2007, 08:53 AM -
Rear alignment is off after Koni/!= rear isolator lowering, car pulls to right, specs
By anestech* in forum Suspension and HandlingReplies: 13Last Post: 07-08-2007, 09:42 AM -
Rear alignment issues after removing rear spring isolaters, adj trac bar fix it?
By anestech* in forum Suspension and HandlingReplies: 1Last Post: 06-19-2007, 07:06 PM -
Randy's Rear End Shop Get's Punked (Prank) - Woman looking for a bigger rear!
By powermelissa in forum Multimedia SectionReplies: 0Last Post: 05-25-2007, 10:37 AM -
how to remove the rear inside panels, where the rear spkrs are ?
By Eugenio_SS in forum ConvertibleReplies: 4Last Post: 05-19-2006, 04:39 PM
Bookmarks