rear axles !!

**barryz** · 08-09-2009, 05:14 AM

i am makin up my mind of changing every part of my rear axle .
my axle makes to much noise !
is there not somewhere a axle for sale new that is made for below 400hp
that is cheaper then a 12 or 10 bolt . and better than changing every stock part in the axle ?? and less noisy!!

a lott less noisy

thanks for the replys

**shady milkman** · 08-09-2009, 02:49 PM

im letting you know right now..there are ways to strengthen the 10 bolt..but!! it is near worthless to put money into a 10 bolt..you might be able to get 380ish+ with a 10 bolt...but you're on borrowed time..especially if you have a t56...there are c clip eliminators for the 10 bolt and there are griddles to help reduce flex..but ..the problem is that our 10 bolts are 7.5 inches ring gears...this is compared to the other 8.5in 10 bolt and the 12 bolt is 8.875 and the 9' being 9"s ...when our cars hit ..the carrier flexes and causes our small rings to deflect and the contact patch of the rings to be very small ..and grenades the entire inside. so axles while weak...are no where near the weakest point..sorry man.

**barryz** · 08-14-2009, 08:55 AM

what is the best axle to buy and the cheapest solution of course???

thanks for the reply

**damons00maross** · 11-02-2009, 01:47 PM

12 bolt! i got 430 to the tires and i'm still trying to find one used. your still gona pay around 2g's used but then you dont have to worrie about getting towed home.