Results 1 to 8 of 8
are my mounts bad trans/motor
This is a discussion on are my mounts bad trans/motor within the Drivetrain forums, part of the LSx Technical Help Section category; well i just noticed that my shifter moves and motor also would that be it most times its like in ...
LinkBack URL
About LinkBacks-
05-09-2012, 01:45 PM #1Junior Member
- Join Date
- Feb 2012
- Location
- canada
- Posts
- 46
are my mounts bad trans/motor
well i just noticed that my shifter moves and motor also would that be it most times its like in the you tube link
-
05-09-2012, 05:06 PM #2None Shall Pass
- Join Date
- Jan 2010
- Location
- East of Cleveland, Ohio
- Posts
- 3,735
Black- 99 WS.6 - Modified
I would check them.
-
05-09-2012, 06:17 PM #3Moderator
- Join Date
- Feb 2009
- Location
- Mansfield, PA
- Posts
- 15,691
Black & Blue- '02 WS.6 / '07 Suburban
Agree. Easy to inspect the mounts and see what is happening. You can use a pry bar to carefully apply pressure to the engine and transmission to see if the mounts are broken or deteriorated. Start with the trans mount.
-
05-09-2012, 09:28 PM #4Member
- Join Date
- Mar 2010
- Location
- AZ
- Posts
- 440
Cayanne- 98 Z28 Vert M6
Interesting. My car did this (to a lesser degree) before I switched to my MGW shifter. What are some other symptoms of loose mounts?
-
05-10-2012, 02:52 AM #5None Shall Pass
- Join Date
- Jan 2010
- Location
- East of Cleveland, Ohio
- Posts
- 3,735
Black- 99 WS.6 - Modified
Excessive movement of the shifter, and other drivetrain componants. Usually noises related to the exhaust hitting the floor, or other componants, and possibly feeling it through the floor.
-
05-10-2012, 06:17 AM #6Senior Member
- Join Date
- Jun 2011
- Location
- Branchville, NJ
- Posts
- 1,813
Silver & Blue- 02 Camaro SS, 04 GTO
Time for a new trans mount.
Originally Posted by ws6ws6
My ride is a 2002 Camaro SS SLP #3296 with 30k, LTH, 3" Y, CME, Frost tune, K&N, ported TB, Blackwing lid, Bellows, MSD, Denso Iridium, and 85mm MAF, Bilsteins, Eibach springs, SLP strut brace, Adj. Panhard, TA Girdle, UMI, Pro 5.0, Nitto NT555
My wife has a 2004 GTO with the rare SAP, 18" wheels, K&N Cold Air System, MSD, Ported TB, Frost tune, Denso Iridium, Flowmaster cat-back, 75k
-
05-10-2012, 12:18 PM #7Junior Member
- Join Date
- Feb 2012
- Location
- canada
- Posts
- 46
well i got my car looked at and all is good btw the video was not of my car my car just has very little movement this was the worst video i could find of it on the internet
and when they had my car up they showed me it had sub frame connectors and i just ordered some slp ones so had to cancel that order are the kenny brown ones good?
-
05-10-2012, 01:38 PM #8Senior Member
- Join Date
- Jun 2011
- Location
- Branchville, NJ
- Posts
- 1,813
Silver & Blue- 02 Camaro SS, 04 GTO
I am not familiar with Kenny Brown SFC. Most are good in the case of tying up the front half with the back half of the unibody.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks