micronite gears in a 10 bolt

[john5632]

Anyone here have micronite gears in a 10 bolt?If so what ratio,and how much power are you making?Are you N/A F/I n20 and are you an auto or stick?How do you drive it.Im thinking of going to 3:73 gears and wanted to know if the micronite proces is worth it on a 10 bolt
thanks
john

[shady milkman]

gears arent the things that break in 10bolts..but hey might as well get it most people pushing big numbers are running 12 bolt or 9"

[mrr23]

i do. i was the one that did the testing. i have 3.73 micronite processed gears.

i did two seperate tests. the first one was comparing a set of unprocessed 4.10 gears to the micronite proceesed gears. this test compared rwhp, temperature, and wear. both gears received over 1000 miles on them. and went and track tested them as well with a 200 shot of nitrous.
http://mikronite.com/dyno.asp

second time around, we used 3.73 gears. tested REM treatment, cryogenic treament, REM and cryogenic treatment, and the micronite process. all gears went through 500 miles run in and dyno testing. i did 6 gear swaps in 4 months.
http://vincihighperformance.com/MIKR...IN%20PAGE.HTML

[mrr23]

gears arent the things that break in 10bolts..but hey might as well get it most people pushing big numbers are running 12 bolt or 9"

except me. and i'm fixing to really put them to the test.

[shady milkman]

except me. and i'm fixing to really put them to the test.

oh shush!

[john5632]

I may swap gears in a month or so.Ive seen guys with auto such as myself push the stock 10 bolt into the 10's.I figure if im paying for install why not get them.