Page 1 of 2 12 LastLast
Results 1 to 20 of 24

how fast are you on the 10 bolt????

This is a discussion on how fast are you on the 10 bolt???? within the Drivetrain forums, part of the LSx Technical Help Section category; the million dollar Q... how much will it really take. just want to see whose out there that has gone ...

  1. #1
    stab it and steer it!
    Join Date
    Aug 2006
    Location
    illinois
    Age
    46
    Posts
    75

    red
    99 Z28 SS convertible

    how fast are you on the 10 bolt????

    the million dollar Q... how much will it really take. just want to see whose out there that has gone so far... or gone too far. please if replying give the car, e.t.'s, type of tire, approx. h/p, basic mods, and if so rear end mods.

  2. #2
    Blown, Stroked, & Sprayed

    Ed Blown Vert's Avatar
    Join Date
    Aug 1999
    Location
    San Diego, Ca
    Posts
    50,746

    Black
    383 Procharged & N20 Vert

    Still on the stock rear.
    Black 1999 Blown Convertible A4
    Forged 383, ATI D-1SC
    NX MAF Kit | 222/226 .585 115
    AS Stage II 6.0L FI Heads
    Moser 9" | 3.70 | Wavetrac | 35 Spline | Vigilante 3600
    548.0 RWHP - 563.8 RWTQ - 10# - D1

    666.0 RWHP - 734.2 RWTQ - 125 Shot - P1

    Black 2009 Escalade Hybrid 4WD
    Black 2008 GMC Yukon Hybrid 4WD (Totaled)

    Black 2013 Chevy Volt (Gone)

  3. #3
    stab it and steer it!
    Join Date
    Aug 2006
    Location
    illinois
    Age
    46
    Posts
    75

    red
    99 Z28 SS convertible

    sweet... how stock is stock? diff unit, axles, rear cover...

  4. #4
    Blown, Stroked, & Sprayed

    Ed Blown Vert's Avatar
    Join Date
    Aug 1999
    Location
    San Diego, Ca
    Posts
    50,746

    Black
    383 Procharged & N20 Vert

    Completely stock. I don't expect it to last much longer.

  5. #5
    stab it and steer it!
    Join Date
    Aug 2006
    Location
    illinois
    Age
    46
    Posts
    75

    red
    99 Z28 SS convertible

    whats it 60ft and what tires? gonna do a 12 bolt?

  6. #6
    Blown, Stroked, & Sprayed

    Ed Blown Vert's Avatar
    Join Date
    Aug 1999
    Location
    San Diego, Ca
    Posts
    50,746

    Black
    383 Procharged & N20 Vert

    Quote Originally Posted by 99RedRagtop View Post
    whats it 60ft and what tires? gonna do a 12 bolt?
    60' is in the sig with ET Drags.

    Most likely will do a 12 bolt with 3.73

  7. #7
    stab it and steer it!
    Join Date
    Aug 2006
    Location
    illinois
    Age
    46
    Posts
    75

    red
    99 Z28 SS convertible

    hmmmm... those #'s make a 10 sc. car... pretty impressive. your car on ATI's site in the gallery? think i recognize it. If you're interested in the 12 bolt i am w.d. w/ Strange. they've got a great bolt in, sold a few already. let me know... i'll hook ya up w/ a sweet deal!

  8. #8
    Member MISFIT's Avatar
    Join Date
    Aug 2006
    Location
    nowhere
    Age
    37
    Posts
    512
    99 pontiac trans am ws6


    mods:

    strut tower brace
    carbon fiber whisper lid & K&N Filter
    Mac Midlength Headers
    Gutted Cats
    Loudmouth system
    LS6 Intake
    Stronger Valvetrain
    Joe Overton 228/232/*.595 lift/110-LSA
    4.10 Gears in back.

    Car has seen 11.00 flat on full out drag slicks. Only once...


    Rear has been rebuilt 3 times, and is on its way out again....i wish Strange would finance me for a 12 bolt or Dana 60

  9. #9
    Member
    Join Date
    Aug 2006
    Location
    california
    Posts
    123

    allllllllll black
    2002 35th z28

    )misfit( what seems to be the part exessively going out. mine seems to be the pinion gears...no eaton problems and no axel problems...im going to totally build the rear exept for axels and hope it wont break after 2000 miles

  10. #10
    Blown, Stroked, & Sprayed

    Ed Blown Vert's Avatar
    Join Date
    Aug 1999
    Location
    San Diego, Ca
    Posts
    50,746

    Black
    383 Procharged & N20 Vert

    Quote Originally Posted by 99RedRagtop View Post
    hmmmm... those #'s make a 10 sc. car... pretty impressive. your car on ATI's site in the gallery? think i recognize it. If you're interested in the 12 bolt i am w.d. w/ Strange. they've got a great bolt in, sold a few already. let me know... i'll hook ya up w/ a sweet deal!
    Yep, thats my car.

  11. #11
    Member
    Join Date
    Aug 2006
    Location
    california
    Posts
    123

    allllllllll black
    2002 35th z28

    Well I Must Take Back My Last Comment.......i Opened The Rear Today And Found My Eaton Has Blown To Sh#t...so I Bought A Stock Used 10 Bolt To Replace It...im Wishing My Self Good Luck And Pray It Wont Go Untill I Have Atleast 2k For A 12 Bolt

  12. #12
    Senior Member mrr23's Avatar
    Join Date
    Jul 2005
    Location
    orlando, fl
    Posts
    7,134

    dark bowling green
    2000 corvette

    both cars on stock ten bolt with 3.73 gears.

  13. #13
    Member
    Join Date
    Aug 2006
    Location
    california
    Posts
    123

    allllllllll black
    2002 35th z28

    the rear i bougt have the stock 342 gears...they feel like they pull harder to me than 373 or 410--mph has gone up...feels faster

  14. #14
    Member
    Join Date
    Jan 2006
    Location
    decatur, AL
    Age
    44
    Posts
    109

    6.93 at 100.3 mph
    1992 Camaro RS

    hundreds of passes on my stock 10-bolt, richmond gears, stock carrier. 1.50's 60 ft on nitrous and 1.70's on motor in a 3500 lb 1992 camaro. i've been lucky i think.

  15. #15
    Slow'er'Ass Mr. Luos's Avatar
    Join Date
    Aug 2005
    Location
    Thornton, CO
    Posts
    23,785

    Red Tint Jewelcoat
    2008 Trailblazer SS

    I have an M6 car. That is the reason I upgraded before it blew up. Didn't expect it to last under one launch on the M/T DR's.

    I did go 12.64 at 115.44 on Nitto DR's. Short times were horrible though....2.234.
    I freaking hate the altitude in Colorado.
    2008 Trailblazer SS
    Yank PTB3600, Kooks 1 7/8" LT's, 4" intake, E-fans, Magnaflow, Sonnax kit, tranny cooler, tune.
    Lowered, HID's, tinted.

    1999 Pontiac Trans Am WS.6 #1747 SOLD
    531.1 RWHP 481.3 FT/Pounds all motor.

  16. #16
    Member MISFIT's Avatar
    Join Date
    Aug 2006
    Location
    nowhere
    Age
    37
    Posts
    512
    Quote Originally Posted by unnatural aspirations View Post
    )misfit( what seems to be the part exessively going out. mine seems to be the pinion gears...no eaton problems and no axel problems...im going to totally build the rear exept for axels and hope it wont break after 2000 miles


    either snapping teeth on the ring gear, or the differential just completley exploding.



    its impossible to build one...it will never hold.

  17. #17
    Member MISFIT's Avatar
    Join Date
    Aug 2006
    Location
    nowhere
    Age
    37
    Posts
    512
    Quote Originally Posted by Mr. Luos View Post
    I have an M6 car. That is the reason I upgraded before it blew up. Didn't expect it to last under one launch on the M/T DR's.

    I did go 12.64 at 115.44 on Nitto DR's. Short times were horrible though....2.234.
    I freaking hate the altitude in Colorado.


    i launched on the street at about 5000rpm with a set of hoosier dragslicks and nearly lifted the front wheels off the ground on my 10 bolt did that 3 times in a row against a c6 vette.



    ......still driving on it, but its making cute lil sounds when turning corners at low speed.

  18. #18
    Senior Member
    Join Date
    Sep 2005
    Location
    rochester,ny
    Age
    39
    Posts
    2,667

    pewter
    2001 z28 lingenfelter 383

    cute lil sounds..lmao

  19. #19
    Member MISFIT's Avatar
    Join Date
    Aug 2006
    Location
    nowhere
    Age
    37
    Posts
    512
    Quote Originally Posted by tonyjnjz View Post
    cute lil sounds..lmao


    it's just whispering sweet nothings to me, thanking me for that night with the hoosier sticky goodness it experienced.....i ripped that rear a new asshole.

  20. #20
    Junior Member
    Join Date
    Jul 2006
    Location
    jersey
    Age
    33
    Posts
    66

    red
    98 M6 Z28

    Quote Originally Posted by Ed Blown Vert View Post
    Still on the stock rear.
    I'm glad to see ths because everyone is always saying how bad the stock rear is. I was gonna save to upgrade and I still might but I had another LS1 Camaro and I got it to 86000 miles doing burnouts and launching it every damn time it move and I never had a problem.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Fast Intake Bolt Details???
    By supercharged666 in forum External Engine
    Replies: 1
    Last Post: 09-17-2009, 01:38 PM
  2. Fast 90mm Intake and ARP Bolt Kit
    By AFASTYZFR1 in forum Parts For Sale / Trade
    Replies: 1
    Last Post: 09-09-2008, 04:54 AM
  3. Is Fast Intake Complete Bolt On?
    By TheGimp711 in forum External Engine
    Replies: 5
    Last Post: 02-04-2008, 11:27 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •