Results 1 to 4 of 4
Thread: 4.11's to much for a MS cam?
-
11-03-2009, 01:16 PM #1
4.11's to much for a MS cam?
So my boy ordered the MS4 camshaft and now hes deciding which gear to put into the Moser 9". I said go for 4.11's but do you think that would be steep gearing for the MS4 cam which is a very high reving cam. No doubt he will lose low end power so the 4.11's should make up for any low end power/loss, but once the car revs up, do you think he would run out of gear very quickley once he reaches his sweet spot?
-
11-03-2009, 01:22 PM #2
4.11 is the least he should be thinking about. 4.30 would be a better gear IMO for any MS series cam.
Depends on what hes doing. In the 1/4 mile and stock size tires he will be crossing the line close to 7000 RPM. A 28" tall tire would help greatly at the track. Otherwise, I wouldnt thinking twice about 4.30 and a MS cam.370 CI - Twin 6766 Turbo - Jakes stage 5 4L80E - MWC 9" - Holley Dominator
Build in progress...
-
11-03-2009, 06:12 PM #3
- Join Date
- Jun 2008
- Location
- Rochester, NY Rochesterracing.com
- Posts
- 1,276
- 2000 Camaro B4C
yeah my buddy went with a 9" and 4.11's with the MS4 and his only regret....not doing 4.30's or 4.56's. so this winter he's doing his gears again haha
-
11-05-2009, 11:08 AM #4
Wait! are we talk-n A4 or M6?.........before we go recomending 4.30's let's make sure he's not auto!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks