4.10

[ananmech]

This is to the people who have 4.10 RnP? I want to know if you're drinving around 75 m/h what is the RPM at? in My T/A is around 2000 RPM? I want to know at what RPM would it be ?

If i want to install 4.10 do i have to change anything else?
I drive my TA everyday in highways so would it be better if i go with the 3.73 or 3.91 or 4.10
and I really want to understand what stalling means???

[Jays00ss]

with my 4.30 gears in my 9" with 275/40/18's @75 mph I am turning 2050-2100 rpm.

[ultra_badass]

4.10's still junky 10 bolt stock tiers im sitting about 1900 rmp and i love it 6th gear is no longer uselesss

[RacerBob]

This is to the people who have 4.10 RnP? I want to know if you're drinving around 75 m/h what is the RPM at? in My T/A is around 2000 RPM? I want to know at what RPM would it be ?

If i want to install 4.10 do i have to change anything else?
I drive my TA everyday in highways so would it be better if i go with the 3.73 or 3.91 or 4.10
and I really want to understand what stalling means???

From the last line, I will assume that you have an A4.

I have not re-programmed my speedometer yet, but at about 70 mph, I am at 2400 rpms with 245/50R16 tires (just under 26" dia.).

Do you have to do anything else? That's a topic that has been beat to death here. My opininion, go with an aftermarket rear if you will be making decent power, putting sticky tires on, or both.

Here is a link that will help you understand stall speeds associated with a torque converter: http://www.exoticperformanceplus.com....html?item=809

You can also search this site to find info about stall. Some of our sponsors and members have posted some great info.

Good luck with your build.

[slims00ls1z28]

I have 4.11's in my Z28 with an auto. 75 was roughly 2500 rpm.

[dafizzman1]

6th gear is about 2000rpms..

[TedsB4Csled]

I have A4 with 373 and it is about 2400rpm @ 75mph. Not happy with that on highway for gas mileage, but it pulls a lot better.