Results 1 to 7 of 7

12 bolt

This is a discussion on 12 bolt within the Drivetrain forums, part of the LSx Technical Help Section category; looking at a 12 bolt moser. my car is a 99 ss and the rear is the stock 10 bolt ...

  1. #1
    Junior Member
    Join Date
    Nov 2009
    Location
    GA
    Posts
    42

    BLACK
    1999 camaro ss

    12 bolt

    looking at a 12 bolt moser. my car is a 99 ss and the rear is the stock 10 bolt 4 channel abs dics brakes, and traction control. the 12 bolt im lookin at is out of a 97 z but its a 3 channels with disc brakes. he said the rear is the stock length. will this directly bolt up to my car?? what needs to be done as far as the difference in 3 and 4 channel??? any other modifications that will have to be done?? ....thanx guys

  2. #2
    Super Moderator
    pajeff02's Avatar
    Join Date
    Feb 2009
    Location
    Mansfield, PA
    Posts
    21,576

    Black & Blue
    '02 WS.6 / '07 Suburban

    Not sure if your ABS/TCS will work -- your current system runs a reluctor ring and sensor at the end of each axle. The ABS only axle has a reluctor ring in the differential and a sensor on the housing. Not sure if the ends of the axles to be swapped in have the appropriate lands on them to accept the rings. If they do, you can transfer them over. I would look this over carefully and get some input from other members. If you pics of what I am talking about, let me know. I just swapped a Moser 12 bolt into our car back in January.

  3. #3
    Car Nut ICRAZY6's Avatar
    Join Date
    Feb 2006
    Location
    Lacon, Illinois
    Posts
    404

    Black
    2002 Trans Am WS6

    That rear will only work if your not planning on using the TCS or the ABS.

  4. #4
    Junior Member
    Join Date
    Nov 2009
    Location
    GA
    Posts
    42

    BLACK
    1999 camaro ss

    found out it will work. jus have to get the reluctor rings pressed in on the axles and the abs/tcs will work. thanks guys

  5. #5
    Senior Member INMY01TA's Avatar
    Join Date
    Jan 2006
    Location
    The great red state of MD.
    Posts
    5,755

    Black
    2001 Trans Am (sold)

    Backing plates are different are they not?

  6. #6
    Junior Member
    Join Date
    Nov 2009
    Location
    GA
    Posts
    42

    BLACK
    1999 camaro ss

    ^ nope u can just switch em over

  7. #7
    Moderator 35th-ANV-SS's Avatar
    Join Date
    Oct 2008
    Location
    Wherever life takes me
    Posts
    12,465

    Red
    02 35th LE Camaro SS

    Hmmm. Interesting. I thought there was something else going on between the 3-4 channel in order to make the ABS/TCS work.

    Only the backing plates and reluctor rings being pressed on? 100% sure?

    Where is your wiring coming from going out to the ABS wheel sensors?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Bolt-In Rearend Buyers Guide - Bolt-In Rearends -
    By Ed Blown Vert in forum Almost Anything Goes
    Replies: 0
    Last Post: 08-25-2010, 03:40 AM
  2. Bolt-In Rearend Buyers Guide - Bolt-In Rearends -
    By Ed Blown Vert in forum Almost Anything Goes
    Replies: 0
    Last Post: 08-24-2010, 03:40 PM
  3. Bolt On Parts - Dyno Proven Bolt-ons - Tech
    By Ed Blown Vert in forum Camaro / SS
    Replies: 7
    Last Post: 10-01-2007, 05:37 PM
  4. Center bolt to Perimeter bolt Heads, Coil Mounting help
    By juiced99ws6 in forum Internal Engine
    Replies: 7
    Last Post: 03-31-2007, 12:38 AM
  5. wtb - 12 bolt - have cash & rebuilt 10 bolt for partial trade
    By wesTXwitesnake05 in forum Parts For Sale / Trade
    Replies: 0
    Last Post: 07-09-2006, 11:17 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •