Results 1 to 20 of 28
Thread: LS2 colorado
-
03-21-2006, 05:54 PM #1
LS2 colorado
Just thought you guys might like this. it's not done yet but it's close.
I will post more pics when it is breathing.Last edited by ls1colorado; 03-21-2006 at 05:59 PM.
-
03-22-2006, 06:29 AM #2
- Join Date
- Jan 2006
- Location
- NY
- Age
- 41
- Posts
- 193
yellow- 02 Collector Edition TA
Thats badass, keep the pictures coming.
-
04-10-2006, 08:23 PM #3
badass dude keep us updated.
-
04-14-2006, 06:29 PM #4
-
05-08-2006, 08:18 PM #5
- Join Date
- Apr 2006
- Location
- St. Pete, Fl
- Posts
- 4
Victory Red- 2006 Colorado
Any new pics ? I am wanting to do a similar swap in my Colorado.....Are there major problems you came across ? What computer are you using ? And what trans ?
-
05-09-2006, 06:39 PM #6
welcome ,sounds like a great project,keep us posted
-
05-19-2006, 01:09 AM #7screamin seemanGuest
Who makes the headers and what is the application?
-
05-19-2006, 03:45 AM #8
why is your usernam ls1 colorado?
-
05-19-2006, 09:41 AM #9
The headers are hand fabricated just for this application.
The reason for the username is because when I was going to start this project, I thought that I was going to use the ls1, and then of course I changed my mind.
-
05-19-2006, 02:06 PM #10screamin seemanGuest
Thanks for the reply. I am in the middle of a ls1 swap into a 04 colorado 4x4, and I am going to be working on the exhaust pretty soon.
-
06-02-2006, 07:46 PM #11
- Join Date
- Aug 2005
- Location
- Heltonville, In 47436
- Age
- 48
- Posts
- 20
Black- 1999 Pontiac Trans am
Definately keep the pics coming, I was just thinking the other day if its been done, what are you doing for the rear end / trans?
-
06-20-2006, 01:56 PM #12
Hook it up dude!!!!
ok i have an 05 colorado Z71 and im am very interested in doin the same thing, i was wondering if u could send me all ur resources as far as what got u to where ur at and what is all entailed in the project. One other question did u have to send ur sub frame out for fab? Me and my buddy just put an LS1 in his 95 Mazda RX7 and he had to have the sub-frame fabbed my Hinson..... Im super stoked to do this but didnt know where to start looking and pricing? Any and all help is greatly appreciated!!!! thanks dude.... my aol sn is GBSPigskin if u wanna get a hold of me on there it would probably be better so u can answer all my questions quickly and easliy.... -Chris
-
06-22-2006, 11:37 AM #13
nice keep up the good work and what do you think it will run 12's
what tire are you going with and rear end axle and ratio
-
06-25-2006, 03:40 PM #14
-
07-02-2006, 03:10 PM #15
There will be new pics soon, having some trans problems right now. So as soon as i get some time to fix the thing, i will post some more pics and info.
the trans is a 4l80, not stock. the rear end is stock with 3.42's for now. I don't know if I will change this or not, unless it breaks.
As far as the sub frame, we did have to fabricate new motor mount brakets, but we didn't send it out.
thanks
Tom
-
07-02-2006, 09:28 PM #16
holy shit thats cool!
does that void the warranty?
jk
-
07-03-2006, 05:19 AM #17
The rear tires are 285/40/17 on a widened factory zq8 wheel. It's a shame that 285's are all that I could get underneath there. The s-10's would fit larger tires underneath.
But, oh well.
-
07-03-2006, 06:04 AM #18
- Join Date
- Nov 2005
- Location
- GA
- Posts
- 55
BLACK- 2000 Camaro ss
savannah , Ga?
Are you located in Savannah Ga? Whos handling most of the work? What gauge setup worked with it and any integration of the cab wiring and engine wiring problems that you have had? I am in Douglas and the shop my brother works at put a Corvette Ls1 in a 90 Silverado. It is in Lyons.
-
07-03-2006, 02:08 PM #19
Yes, Savannah, Ga.
The work was done in ST. Pete, Fla.
I havent put guages in quite yet, there have been problems getting the ECM and the BCM to communicate with each other>
It is much more complicated than the 1990 truck, because of the new computers on these trucks.
Alot of aggrevation, but worth it in the end.
-
07-18-2006, 03:26 PM #20
- Join Date
- Apr 2006
- Location
- St. Pete, Fl
- Posts
- 4
Victory Red- 2006 Colorado
Hey Tom, thanks for giving my number to the shop. He called me about 3 weeks ago, he told me he would let me know when it was getting close to being done. I think I saw his red S-10 the other day too. Good luck man, I hope your truck is finished soon so you can enjoy it.
Chris
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
New guy from Colorado
By insanity213 in forum New Member IntroductionsReplies: 4Last Post: 05-01-2016, 01:57 PM -
New here from Colorado
By Breck23 in forum New Member IntroductionsReplies: 5Last Post: 09-02-2010, 07:45 PM -
Question: New to Colorado
By Double0me in forum Rocky Mountain MembersReplies: 6Last Post: 06-30-2010, 06:19 AM -
I am in Colorado....
By Mr. Luos in forum Almost Anything GoesReplies: 103Last Post: 01-19-2009, 10:04 PM -
Hello, From Colorado
By B-Mac in forum New Member IntroductionsReplies: 2Last Post: 04-20-2007, 09:38 AM
Bookmarks