Results 1 to 15 of 15

dont hate me

This is a discussion on dont hate me within the GM Trucks forums, part of the Vehicle Specific category; i do have a z28 camaro (13.1)et that i love but i also have a truck ok its a dodge ...

  1. #1
    Member silverz28camaro's Avatar
    Join Date
    Apr 2006
    Location
    Washington MO
    Age
    31
    Posts
    796

    sebring silver
    2000 z28

    dont hate me

    i do have a z28 camaro (13.1)et that i love but i also have a truck

    ok its a dodge but it is cool its a 1988 dodge ram 150 4x4 short bed with a 4 inch lift with 31x1250 procomps

    it used to have a 318 that ran 19.3 in the quarter, hey stop laughing

    well i pulled that motor out after 250 thousand miles and put in a 440 big block with headers, msd, edelbrock intake , carb . it feels alot faster then the 318 but i made a mistake when i bought the 440 , it has 8.1:1 compression ration with .425 lift cam i am going to gateway next tuesday and am hoping for a 16.8,

    when i get the body work done and my camaro to run low 12's i am going to rebuild the 440 with high compression pistons big cam edelbrock heads and prabably a 496 stroker kit. sound cool?

    well my question is will my truck beat a lowered fullsize longbed 97 v6 vortech stock truck, i have a case of bud kight beat on this so i don't want to lose, LOL what would that truck run

    will get back after gateway with some et

  2. #2
    Member camarolvr69's Avatar
    Join Date
    Jan 2006
    Location
    Woodbridge, VA
    Posts
    384

    Silver
    1997 camaro z28

    if you are a good driver you might get a high 14 et. my bet is low 15s with those huge tires

  3. #3
    Member camarolvr69's Avatar
    Join Date
    Jan 2006
    Location
    Woodbridge, VA
    Posts
    384

    Silver
    1997 camaro z28

    lol dont worry about that 97' hes only got 180hp
    those things do the 1/4 in 16.0. go whoop him up

  4. #4
    Member silverz28camaro's Avatar
    Join Date
    Apr 2006
    Location
    Washington MO
    Age
    31
    Posts
    796

    sebring silver
    2000 z28

    my truck is an auto and the 440 was rated at 260 hp with 360 tq stock, i do have headers performer intake 750 carb and msd distributor ,maby i am at 300hp? the truck only weighs 4500 and it has 3.21 rear gear ratio so i don't think i will run a 14

    really think a fullsize truck with v6 4.3 will do 16.0

    well i will post my truck times next wednesday

  5. #5
    Member silverz28camaro's Avatar
    Join Date
    Apr 2006
    Location
    Washington MO
    Age
    31
    Posts
    796

    sebring silver
    2000 z28

    what did you run 15's in camarolvr69

  6. #6
    Member camarolvr69's Avatar
    Join Date
    Jan 2006
    Location
    Woodbridge, VA
    Posts
    384

    Silver
    1997 camaro z28

    lol i didnt run 15's if you look at my original post it says that im guessing YOU will run 15's because you have huge tires on your ram

  7. #7
    Member camarolvr69's Avatar
    Join Date
    Jan 2006
    Location
    Woodbridge, VA
    Posts
    384

    Silver
    1997 camaro z28

    i used a 1/4 mile calculator and it said you will run around a 15.1 not sure how accurate it is ... but keep us posted

  8. #8
    Member 05gtoautoX's Avatar
    Join Date
    Jan 2006
    Location
    riverton
    Posts
    556

    Impulse Blue
    2006 Pontiac G.T.O.

    I have an 84 ram 150, 4 inch lift, 4x4, 15 in. centerlines and 35in M/T baja claws, it too has 3.21 gears and a peg leg, I replaced the 318 after 400,000 miles and swapped in a 440 out of a 77 cordoba, I rebuilt it stock at first, and it ran a 16.87@83, and now it has edelbrock alum. heads, comp. cams cam, thorley tri-ys and .456 gears, took her to the track last month and she went 15.4@92, but the holley carb I have is only a 650, need to get the 770 truck avenger, and should get into the deep 15s, also I live around 5500 ft. , hope this helps you

  9. #9
    Member silverz28camaro's Avatar
    Join Date
    Apr 2006
    Location
    Washington MO
    Age
    31
    Posts
    796

    sebring silver
    2000 z28

    it sure does make me fell more confident that on what time i will get since we almost have the same setup

  10. #10
    Member silverz28camaro's Avatar
    Join Date
    Apr 2006
    Location
    Washington MO
    Age
    31
    Posts
    796

    sebring silver
    2000 z28

    well the truck ran a 16.3 at 82mph with a 2.3 60 ft on a hot 85 degree night and i beat the lowrider by 4 lenghs the next day

    cant wait ot see what heads, cam, gears, and and stroker kit does

  11. #11
    Member 05gtoautoX's Avatar
    Join Date
    Jan 2006
    Location
    riverton
    Posts
    556

    Impulse Blue
    2006 Pontiac G.T.O.

    that's really good, what elevation are you at? yeah the cam really woke mine up, if it's gonna be a race/street truck look into a stall converter with those gears, it'll help alot

  12. #12
    Member silverz28camaro's Avatar
    Join Date
    Apr 2006
    Location
    Washington MO
    Age
    31
    Posts
    796

    sebring silver
    2000 z28

    i live in missouri and the track is gateway, elevaton? i would have to look it up the get the number

    i am worried about the stall converter being to muck punishment on my transfer case and rear end, i have the new process 203 and heard that the like to give way under stress and the parts are discontinued, a guy told me a new process 205 is much more stout and is the way to go

    do you think a chrysler 9.25 is worth building, the ford nine inch is tough but i would rather have all chryler parts

  13. #13
    Member 05gtoautoX's Avatar
    Join Date
    Jan 2006
    Location
    riverton
    Posts
    556

    Impulse Blue
    2006 Pontiac G.T.O.

    definately, but the 8 3/4 rear-ends are a very stout piece, properly built they'll hold up to 5-600 hp, you have the NP203?? wierd I have the 205, I think if you put some good axles(moser, richmond, strange etc) and some good gears like 4.11+ also(moser richmond etc.) then put some good U-Joints (spicer) and you'll be preety well off, one thing I would do before all that is add an aluminum external transmission cooler if you already haven't, it'll save the tranny. let me know what you end up doing

  14. #14
    Member silverz28camaro's Avatar
    Join Date
    Apr 2006
    Location
    Washington MO
    Age
    31
    Posts
    796

    sebring silver
    2000 z28

    the np 203 is chain driven right? and the 205 is gear, i have even heard that the 205 is lighter

    i do have the tranny cooler always a good idea

  15. #15
    Junior Member
    Join Date
    Dec 2005
    Location
    IL
    Age
    35
    Posts
    16

    white
    1995 chevy silverado 57k

    chevy trucks are only at the 16 mark if nothing has been done
    you should beat him np

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. dont hate lol
    By Blackbird WS6 in forum Almost Anything Goes
    Replies: 34
    Last Post: 10-26-2010, 03:12 PM
  2. Please dont hate me,but
    By laviente in forum GTO
    Replies: 28
    Last Post: 01-14-2010, 07:23 PM
  3. Dont you hate it when....
    By Sarge in forum Almost Anything Goes
    Replies: 25
    Last Post: 07-23-2008, 06:20 AM
  4. Dont Hate me
    By 2fast2blegal in forum Internal Engine
    Replies: 12
    Last Post: 06-10-2008, 02:27 PM
  5. dont you hate it when?
    By syclone0182 in forum Almost Anything Goes
    Replies: 14
    Last Post: 11-18-2006, 12:18 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •