Results 1 to 4 of 4

1968 Dart Turbo 6.0 Swap

This is a discussion on 1968 Dart Turbo 6.0 Swap within the Classic Muscle forums, part of the Vehicle Specific category; ...

  1. #1
    Junior Member
    Join Date
    May 2018
    Milford, CT

    1968 Dart

    1968 Dart Turbo 6.0 Swap

    Looking to turn so heads! And possibly rattle the Mopar world! I will be swapping a gen 3 6.0 into my recently restored 68 Dart. The Dart is 2 door, recently bought down to bare metal and painted. Chassis and suspension was all redone with oem like parts. I have a 2002 Magnum engine and 727 in the car right now, but Im just not happy with the performance. On the other hand, I built a gen 3 6.0 last year for my 2004 silverado and its a monster. I been tuning with HP tuners for a few years now and since last summer I have 4 gen 3 engine I've built for friends.

    For this project I'll list my budget 6.0 build components, feel free to ask questions.

    LQ4 Block
    Stock Crank
    Stock floating Rods with ARP Cracked Bolts
    Speed-Pro Hypereutectic Pistons H1129CPA
    Sealed Power Plasma-Moly Piston Ring Sets E-921K
    799 Heads with LS6 Blue Springs
    LS7 MLS GM Head Gaskets
    ARP Head bolts
    Trickflow 7.400 Chromoly Pushrods
    OEM Rockers with Trunion Upgrade
    Summit Racing® Pro LS Camshafts SUM-8700 LIFT 0.525 int./0.525 exh. Duration at 050 inch Lift: 225 int./236 exh. Lobe Separation (degrees): 110
    Sharp Customs 102mm LS1 LS2 SHEET METAL INTAKE
    G-Plus 102mm Throttle Body
    60lb @55psi Siemens Injectors
    CX Racing T76 T4 Turbo (Planing 8-12Psi)

    Running a OEM PCM with a PSI Stanalone Harness
    Mated to a TCI Super StreetFighter TH400 with a B&M Nitrous 2400 Stall Converter
    8 3/4 Rear ( Front loader) with a Auburn Posi Carrier with 3.91 Gears

    Aiming to land in the 600s somewhere, I dont see why I would have any trouble. Ill adjust the boost to stay in the 600s as I will plan to drive this Daily to work (3 Miles Away)

    For any Dodge guys on here trying to do this, the rear steering is the first obvious problem, either you can get a gto front sump pan, or you can flip the front spindles and convert to front steer. I will be installing a T-Bird Power Steering Rack & Pinion for Mustang II Crossmembers that uses an lines to my gm ps pump. Also I will be removing the oem torsion setup and fabbing upper tower supports for QA1 Coilovers.

  2. #2
    Junior Member
    Join Date
    May 2018
    Milford, CT

    1968 Dart

  3. #3
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Ugy Lower Corner of AL

    Navy Blue Metallic
    98 T/A w/ mods, 97 FBVert

    1968 Dart Turbo 6.0 Swap

    your pic is not showing

    6.0L Block - Forged 403 built, breaking it in , Polluter Stg3 Cam, FAST 102mm Intake, NW102 TB, MSD wires, NGK TR6 plugs, Truck Coil Packs, LS3 Fuel Injectors, CC Pacesetter LT Headers, TS&P ORY, QTP e-Cutout, Magnaflow Muffler, 104mm Air Lid & Line Lock, Catch Can, Stage 2 T56 w/Viper shaft, PRO 5.0 Shifter, Tick MC, Monster Stg 4 Clutch, QT SFI BH, MWC DSL, UMI: SFC, PHB, LCA's, LCA Relocation Brackets & TA, Hotchkis Springs (1" Drop), YR1 Snowflake Wheels wrapped in NT555 tires & Custom Fab Ford 8.8 rear w/4.10 Yukon Gears, WSQ Hood, 3"CM Strange Eng Drive Shaft.

    97 FB Vert

    Horsepower never lies, but is often lied about!

  4. #4
    MEMBER 5150's Avatar
    Join Date
    Aug 2005
    Visalia Cali

    2000 Z/28

    Sounds badass!

    Sent from my iPhone using Tapatalk Pro
    Lt's,SFC,3,600 Fuddle stall,Spohn Adj. tunnel mount torque arm, BMR LCA,Ls6 intake,Air lid,Under drive pulley,S60 rear,Frost tune and a few more things I cant remember.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Another 1st Gen F-Body LS1 Swap; 1968 Firebird
    By lawless in forum LSx Retrofit and Swap
    Replies: 26
    Last Post: 09-08-2015, 02:01 PM
  2. 1969 Camaro Twin Turbo Dart LS Next 427
    By FurchesPerformance in forum Classic Muscle
    Replies: 8
    Last Post: 08-20-2015, 08:39 AM
  3. 350 turbo trans swap
    By bradboyd in forum Automatic Transmission
    Replies: 7
    Last Post: 07-24-2011, 05:45 PM
  4. Dick Landy's 1968 Dodge Dart - Where It All Began
    By Ed Blown Vert in forum Almost Anything Goes
    Replies: 0
    Last Post: 07-14-2010, 02:30 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts