what fo you think of this cam package
This is a discussion on what fo you think of this cam package within the Internal Engine forums, part of the LSx Technical Help Section category; I have a 99 ws6 6spd just have bolt ons i was wondering how this set up would worl with ...
09-22-2010, 02:55 PM #1
- Join Date
- Oct 2005
- baltimore md
- 99 ws6
what do you think of this cam package
I have a 99 ws6 6spd just have bolt ons i was wondering how this set up would worl with a pretty much stock motor and down the road spraying a 150 shot on it, thanks
54-428-11 Cam Shaft,,,, Cam Style Hydraulic roller tappet
Basic Operating RPM Range 2,200-7,400
Intake Duration at 050 inch Lift 228
Exhaust Duration at 050 inch Lift 230
Duration at 050 inch Lift 228 int./230 exh.
Advertised Intake Duration 281
Advertised Exhaust Duration 283
Advertised Duration 281 int./283 exh.
Intake Valve Lift with Factory Rocker Arm Ratio 0.571 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio 0.573 in.
Valve Lift with Factory Rocker Arm Ratio 0.571 int./0.573 exh.
Lobe Separation (degrees) 112
Computer-Controlled Compatible No
Grind Number XR281HR
26918-16 Valve Springs
7955-16 Push Rods
875-16 Roller Lifters
1375-16 Pro Magnum Rockers
Last edited by onebadassws6; 09-22-2010 at 05:03 PM.
09-26-2010, 08:02 AM #2
- Join Date
- Sep 2007
- hagerstown, mercersburg
black trans am
thats the cam i run
its a little bit big for stock heads......if ur looking to change them they go with it if ur going to stick with stock heads its going to be too high of an rpm range then ull need
i swaped from a gmpp hot cam and to this one and 1/4 times slowed down a little bit.. mph picked up .5 and its not as much fun to drive on the street
it come in hard at 5500 and is gone @6400
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By lady_hot_rod in forum Firebird / WS6Replies: 11Last Post: 09-09-2008, 12:47 PM
By LS1POWER in forum Camaro / SSReplies: 23Last Post: 06-19-2008, 05:29 PM
By CorvetteZ06C5 in forum Internal EngineReplies: 19Last Post: 03-15-2008, 08:44 AM
By clg82 in forum Internal EngineReplies: 2Last Post: 09-05-2007, 02:23 AM
By tommyjt2006 in forum Camaro / SSReplies: 2Last Post: 03-02-2007, 04:43 PM