Page 3 of 7 FirstFirst 1234567 LastLast
Results 41 to 60 of 128

Trick Flow Heads and Cam Package

This is a discussion on Trick Flow Heads and Cam Package within the Internal Engine forums, part of the LSx Technical Help Section category; With heads and cam and bolt on I could make over 500hp on a ls1 with patriot heads... I would ...

  1. #41
    I Like It Stroked 99Ls1fever's Avatar
    Join Date
    Aug 2007
    Location
    Greeley,Co
    Posts
    1,006

    Artic White
    1999 Z28 408 Stroker M6

    With heads and cam and bolt on I could make over 500hp on a ls1 with patriot heads... I would go second gen LS1 6.0 iron block lq9 patriot stage 3 heads, MS4 camshaft, qtp on kooks longtubes, fast 92 intake and walla.... thank you ill be here all week
    99 Camaro Z28-
    Colorado's Slowest 408 with a 150 shot
    95 Camaro Z28 LT1-
    LT4 Hot Cam Kit, Fuddle 3,800 Stall
    http://www.fquick.com/99Ls1fever

  2. #42
    TunedbyFrost.com Tuner Frost's Avatar
    Join Date
    Jul 2007
    Location
    Richmond VA
    Posts
    2,415

    LS1.com Sponsor
    GM Tuner

    Quote Originally Posted by 99Ls1fever View Post
    With heads and cam and bolt on I could make over 500hp on a ls1 with patriot heads... I would go second gen LS1 6.0 iron block lq9 patriot stage 3 heads, MS4 camshaft, qtp on kooks longtubes, fast 92 intake and walla.... thank you ill be here all week

    Again, since reading is scarce, THIS IS IN REFERENCE TO A STOCK BOTTOM END LS1. Since you will be here, maybe by the end of the week you will read all of the few words I've posted.

    If you *REALLY* think that Patriot heads flow as well as you purport, I'd say you are pretty far behind the curve of what is out there. Just as far as thinking that magic stick is a magic 500rwhp cam. In most any case with a setup that serious, a custom grind would be better.

    Link me up a dyno graph of a Patriot-headed setup (H/C/I) that made 500 on a stock bottom end on a dynojet, and I will match you with an AFR graph for each one, and we will see who runs out first. Since I have already posted one, that'll be it for me. You won't find what you are looking for out there.

  3. #43
    Member
    Join Date
    Sep 2005
    Location
    Southeast PA
    Posts
    139

    Black
    2000 Z28

    If Patriot heads are so good, why when I went to a shop that was a patriot dealer did he suggest that I got with AFR heads for my car, a brand for which he isn't a dealer. So basically he was taking money out of his own pocket he thinks so little of Patriot, and this isn't even the shop I chose to use.

  4. #44
    515 HP TrickFlow Package BADASS2000SS's Avatar
    Join Date
    Feb 2008
    Location
    Palm Beach, FL
    Age
    40
    Posts
    1,702

    440 RWHP / 410 TQ
    2000 SLP CAMARO SS

    Wow....my thread has gotten out of control! My car is almost done so hopefully I will be able to post my graph somtime soon. Just in case you ARF and Patriot guys forgot, I am using Trick Flow....hence the name of the thread!
    Last edited by BADASS2000SS; 04-17-2008 at 03:50 AM.

  5. #45
    I lika da Chevy's LETHALxLS1's Avatar
    Join Date
    Oct 2006
    Location
    USA
    Posts
    5,329

    BLACK
    Z/28 LS1

    Afr

  6. #46
    JUISSED Midnight02's Avatar
    Join Date
    Feb 2007
    Location
    Atlanta
    Age
    37
    Posts
    663

    Navy Blue Metallic
    2002 Camaro SS

    Hello! I look forward to seeing your numbers! The Trick Flow combo should be good for solid numbers!
    2002 Camaro SS M6, 2.5 PRC 5.3L heads, TFS 228/230 cam, FAST 92, bolt ons + a 10 lb bottle in the back.


    1989 Corvette L98, A4, Full bolt ons, etc.

  7. #47
    515 HP TrickFlow Package BADASS2000SS's Avatar
    Join Date
    Feb 2008
    Location
    Palm Beach, FL
    Age
    40
    Posts
    1,702

    440 RWHP / 410 TQ
    2000 SLP CAMARO SS

    Hey midnight02,

    What are you numbers off the spray?

  8. #48
    I don't sell out! blackSS01's Avatar
    Join Date
    Jul 2005
    Location
    Wisconsin
    Posts
    5,558

    Black
    2001 Camaro SS M6

    I want numbers

  9. #49
    I lika da Chevy's LETHALxLS1's Avatar
    Join Date
    Oct 2006
    Location
    USA
    Posts
    5,329

    BLACK
    Z/28 LS1

    Damnitt! we all want #'s

  10. #50
    Member
    Join Date
    Mar 2008
    Location
    Colorado
    Posts
    191

    Mystic Teal/Chameleon grn
    1998 TA

    How much are just the Trick Flow heads? I already have a cam and with all this talk of heads making major power my mouth is starting to water.
    And how do they compare to PRC heads?

  11. #51
    Junior Member
    Join Date
    Aug 2005
    Location
    Reading, PA
    Age
    54
    Posts
    17

    Red
    1999 WS6

    For what its worth, I had a customer car do 502rwhp and 455rwtq SAE on a dynojet. This was with TFS 215 heads and one of our smaller custom cams.

    Mikey

  12. #52
    515 HP TrickFlow Package BADASS2000SS's Avatar
    Join Date
    Feb 2008
    Location
    Palm Beach, FL
    Age
    40
    Posts
    1,702

    440 RWHP / 410 TQ
    2000 SLP CAMARO SS

    Numbers will be comming soon. Sorry for the delay, my installer has a couple of big project Z06's going on right now also. He is busy, so my SS has taken a seat in the back of the garage for a little bit. All parts from Sumit and Fast are in...it should be soon. I will definetly update ASAP.

  13. #53
    2004 HEAD/CAM CTS-V 9t8z28's Avatar
    Join Date
    Oct 2006
    Location
    doylestown, Pa
    Posts
    6,818

    SILVER
    2004 CTS-V

    Quote Originally Posted by BADASS2000SS View Post
    Numbers will be comming soon. Sorry for the delay, my installer has a couple of big project Z06's going on right now also. He is busy, so my SS has taken a seat in the back of the garage for a little bit. All parts from Sumit and Fast are in...it should be soon. I will definetly update ASAP.
    You got my attention! I was gonna go this route, but I have never had a supercharged car, so I got a Procharger. Next LS1 will have a Trick Flow setup for sure!

  14. #54
    I lika da Chevy's LETHALxLS1's Avatar
    Join Date
    Oct 2006
    Location
    USA
    Posts
    5,329

    BLACK
    Z/28 LS1

    Quote Originally Posted by 9t8z28 View Post
    You got my attention! I was gonna go this route, but I have never had a supercharged car, so I got a Procharger. Next LS1 will have a Trick Flow setup for sure!
    Dood- you have a pro charger on yours now?

  15. #55
    Member jujofields's Avatar
    Join Date
    Apr 2006
    Location
    Lafayette, Indiana
    Posts
    900

    Pewter Metallic
    2002 Trans Am WS.6

    Quote Originally Posted by 9t8z28 View Post
    You got my attention! I was gonna go this route, but I have never had a supercharged car, so I got a Procharger. Next LS1 will have a Trick Flow setup for sure!
    What Procharger kit did you get? I'm curious to hear how much hp/tq you gained from it...

  16. #56
    Member jujofields's Avatar
    Join Date
    Apr 2006
    Location
    Lafayette, Indiana
    Posts
    900

    Pewter Metallic
    2002 Trans Am WS.6

    Quote Originally Posted by BADASS2000SS View Post
    Numbers will be comming soon. Sorry for the delay, my installer has a couple of big project Z06's going on right now also. He is busy, so my SS has taken a seat in the back of the garage for a little bit. All parts from Sumit and Fast are in...it should be soon. I will definetly update ASAP.
    As I'm sure most people are, I can't wait to hear the update!!! Let us know

  17. #57
    2004 HEAD/CAM CTS-V 9t8z28's Avatar
    Join Date
    Oct 2006
    Location
    doylestown, Pa
    Posts
    6,818

    SILVER
    2004 CTS-V

    Quote Originally Posted by LETHALxLS1 View Post
    Dood- you have a pro charger on yours now?

    Quote Originally Posted by jujofields View Post
    What Procharger kit did you get? I'm curious to hear how much hp/tq you gained from it...
    I got the P1SC w/ twin intercoolers and 4" pulley. Yesterday I installed the Racetronix complete fuel pump kit, fan and rad. support, main bracket, and green top 42# injectors. Today I should have the head unit and intercoolers on.

    I should be getting a tune in the next 2 weeks. 8# of boost should get me some good numbers, but the LTH's will probably drop me down to 6-7#

  18. #58
    3-Time F-Body Offender doozjamann's Avatar
    Join Date
    Apr 2008
    Location
    NC
    Posts
    1,365

    Pewter
    2000 SS Camaro

    I'm looking for a good head and cam package for my car now. So I'll be tuned in to this thread for a while. Waiting to see numbers.

  19. #59
    Junior Member
    Join Date
    Aug 2005
    Location
    Reading, PA
    Age
    54
    Posts
    17

    Red
    1999 WS6

    Here you go. 2002 SS Camaro, TFS 215 Heads, Rapid Dominator 2 Cam, ARH Headers, Magnaflow CB.


  20. #60
    Member
    Join Date
    Mar 2008
    Location
    Colorado
    Posts
    191

    Mystic Teal/Chameleon grn
    1998 TA

    That is insane!
    Can you post up a link to the site you ordered the heads from

Page 3 of 7 FirstFirst 1234567 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Question: Anyone have trick flow heads?
    By 02ssmaro in forum Internal Engine
    Replies: 0
    Last Post: 06-16-2011, 02:15 PM
  2. Trick Flow Head/Cam Package??
    By splitfinger09 in forum Internal Engine
    Replies: 47
    Last Post: 10-25-2010, 08:30 PM
  3. trick flow package question
    By 35th02Z28 in forum Internal Engine
    Replies: 28
    Last Post: 05-29-2009, 03:22 PM
  4. Trick Flow 515 Package Results
    By BADASS2000SS in forum Camaro / SS
    Replies: 40
    Last Post: 10-14-2008, 01:47 PM
  5. trick flow head&cam package?
    By mite53 in forum Internal Engine
    Replies: 24
    Last Post: 02-20-2008, 06:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •