Results 1 to 10 of 10

Rockerarms

This is a discussion on Rockerarms within the Internal Engine forums, part of the LSx Technical Help Section category; What's A Good Rockerarm To Go With. Is The Slp 1.85 Any Good...

  1. #1
    Junior Member
    Join Date
    Feb 2007
    Location
    vermont
    Posts
    11

    black
    2000 camaro

    Question Rockerarms

    What's A Good Rockerarm To Go With. Is The Slp 1.85 Any Good

  2. #2
    member since may 2000 nhraformula's Avatar
    Join Date
    Dec 2002
    Location
    n/w chicago
    Age
    47
    Posts
    6,933

    black
    2000 nhra edition formula

    if you never plan on getting a cam, they are o.k
    2000 nhra edition formula
    a few bolt ons, 379 rwhp
    11.96 @113.25

  3. #3
    Member Transam388's Avatar
    Join Date
    Dec 2005
    Location
    Cypress, TX
    Age
    48
    Posts
    230

    White
    98 Trans AM

    I use the Yella Terra shaft mounted and they have been great. I would stay away from rockers in the 1.8 ratio as it does restrict what cams you can use. I had the Crane 1.8's and for all the screwing around with clearance worries and other valve train stuff I really do not recommend going over the standard 1.7 ratio.
    98 T/A: HPE 5.3 Heads, 238/242 113 cam, Kooks 1 7/8 stepped LT headers, Custom Y pipe, Cut out, Borla, NW 90MM TB, FAST 90MM Intake, TB Bypass, Under Drive Power steering and Crank, 150 Dry NOS, Yella Terra rockers, 3400 TC, HPE tuning,

  4. #4
    Junior Member
    Join Date
    Feb 2007
    Location
    vermont
    Posts
    11

    black
    2000 camaro

    I Want To Do Heads And Cam This Summer So What Rocker Sould I Use

  5. #5
    Slower Than a 3rd Gen juiced99ws6's Avatar
    Join Date
    Aug 2005
    Location
    Cape Coral, FL
    Age
    33
    Posts
    3,097

    Mystic Teal
    99 Trans Am & 01 CBR 929

    leave them alone until you do your cam swap. I am using my stockers with the new cam, most people do...

  6. #6
    Member z28misfit's Avatar
    Join Date
    Jun 2006
    Location
    Fleetwood,Pennsylvania
    Age
    30
    Posts
    249

    Red
    1999 Chevy Camaro Z28

    I'm currently running stock rockers as well with my cam swap. I would look into Harland Sharp's roller rockers. They're not too out of this world for price. The only thing I heard was they're a little nose heavy. I may be wrong on this though.
    99 z28 cam,m6 ,S60 4.56gears,Fast 90/90 full boltons,more mods one day.
    11.2 @ 123mph.

  7. #7
    Senior Member slims00ls1z28's Avatar
    Join Date
    Apr 2007
    Location
    TN
    Posts
    1,212

    2005 GTO M6 Black
    2000 Z28 A4 Red

    You also cant use the 1.85's without changing the valvesprings to at least the yellow Z06's. I did it too much hassle for nominal gains. Plus now I have to go back to my stockers (glad I kept them) that I am getting a cam and New dual PRC Valvesprings.

  8. #8
    member since may 2000 nhraformula's Avatar
    Join Date
    Dec 2002
    Location
    n/w chicago
    Age
    47
    Posts
    6,933

    black
    2000 nhra edition formula

    Quote Originally Posted by ssmoken View Post
    I Want To Do Heads And Cam This Summer So What Rocker Sould I Use
    stockers are fine even for heads/cam

  9. #9
    UberTapping Friction Pimp Anthracis's Avatar
    Join Date
    Mar 2007
    Location
    Omar's Tittie Taverna & Grill, Deh Rawod
    Posts
    1,447

    18D Cock Diesel
    1999 Z28; 98 SS #2043 RIP

    what about with this H/C setup:

    http://cgi.ebay.com/ebaymotors/ws/eB...1434730&rd=1,1

    Will 1.7 Harland Sharps make HP improvements?

  10. #10
    Senior Member mrr23's Avatar
    Join Date
    Jul 2005
    Location
    orlando, fl
    Posts
    7,134

    dark bowling green
    2000 corvette

    i run the vinci/crane 1.8 accelerated lift rockers in the wife's car. here's the dyno with the stock cam and stock tune.


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 60,xxx ls1 longblock,intake,maf NO ROCKERARMS!!
    By sobaka79 in forum Parts For Sale / Trade
    Replies: 0
    Last Post: 02-06-2008, 10:48 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •