P/V Clearance with Dart Heads + F14?

**JoeMack** · 03-02-2006, 06:53 PM

OK, it looks like I will be OK with 11.2-1 CR on 93 pump gas. Whats your opinion on piston to valve clearance with Dart 205 heads with 62cc chambers, milled .020, 2.02/1.60 valves and F14 cam (232/234 0598/.598 112)? Thanks

**JoeMack** · 03-03-2006, 05:02 PM

tt

**ringram** · 05-19-2006, 02:07 PM

Hey there,
did you fit this cam. The shop checked mine on stock engine with 282/286 0.551 cam (220/224) and it was too tight for 1.8 rockers (0.583 lift)

How was your clearance?

**JoeMack** · 05-19-2006, 06:21 PM

I did try to check P/V clearance without an adjustable push rod and had plenty of clearance. I was told that it really isn't the correct way to do it so I called Futral and was told that they basically have done the exact set up with no P/V clearance issues. Been running like this for about 500 miles with no problems.