Results 1 to 6 of 6
Thread: Noob ?
-
01-17-2009, 08:11 PM #1
- Join Date
- Jan 2009
- Location
- NC
- Posts
- 6
White- 1998 WS6
Noob ?
Have been told that the 98 LS1 cannot be rebuilt (bored)
Is this true?
-
01-17-2009, 08:16 PM #2
doubt it...im not for sure but one would be preventing you from boring it?
-
01-17-2009, 08:59 PM #3
The problem with boring them is that the block is aluminum with an Iron sleeve adn the sleeve isn[t very thick at all. You can buy bare blocks pretty cheap anyways.
-
01-17-2009, 11:00 PM #4
There's a lot of machining that would have to be done and then the block would have to be re-sleeved. Most people go with an iron block and bigger cube build due to the price of having an aluminum block sleeved.
-
01-18-2009, 04:01 AM #5
You can go with a 3.905 bore, which is just a little oversize. The machine shop will hone fit the pistons. Just don't try to hand hone them. At the machine shop, it will true the bore. Here are some pistons...
http://cgi.ebay.com/ebaymotors/SDPC-...QQcmdZViewItem
-
01-18-2009, 01:27 PM #6
- Join Date
- Jan 2009
- Location
- NC
- Posts
- 6
White- 1998 WS6
Thanks for the replies.
Had the car since new in 08. It now has 167K miles on it.
Just trying to figure if it's worth a restore.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
another NOOB
By VonHulk in forum New Member IntroductionsReplies: 7Last Post: 06-18-2014, 11:21 AM -
nOOb
By finnan in forum New Member IntroductionsReplies: 2Last Post: 12-06-2008, 06:00 AM -
Yet another noob!
By LoneGunman in forum New Member IntroductionsReplies: 1Last Post: 11-26-2008, 03:56 PM -
noob
By Bonemaro in forum New Member IntroductionsReplies: 5Last Post: 10-02-2008, 09:31 PM -
Another noob...
By KahanaReef in forum New Member IntroductionsReplies: 43Last Post: 08-25-2008, 07:43 AM
Bookmarks