Results 1 to 4 of 4

need help with heads!!

This is a discussion on need help with heads!! within the Internal Engine forums, part of the LSx Technical Help Section category; I bought a wreck TA with good block and notice the heads were 313 anybody know we're those heads come ...

  1. #1
    Junior Member
    Join Date
    Feb 2014
    Location
    eagle pass
    Posts
    2

    black with kandy stripe
    98 ss camaro

    need help with heads!!

    I bought a wreck TA with good block and notice the heads were 313 anybody know we're those heads come from?

  2. #2
    Moderator 98TransAmWs-6's Avatar
    Join Date
    Apr 2010
    Location
    Fairfax, VA
    Posts
    3,596

    Black/ Silver
    98 TA WS6/ 01 C5 Corvette

    Quote Originally Posted by badboygal View Post
    I bought a wreck TA with good block and notice the heads were 313 anybody know we're those heads come from?
    Do you mean 317? As far as I know there are no 313 heads. If they are in fact 317s they are pretty good heads just bigger chambers of 72 cc.

    The 317s came on 6.0 trucks if that is what you are asking about.
    1998 Trans Am WS6 - Phantom
    421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
    (Coming Soon) BMR DSL, UMI TQ Arm
    421 LQ9 14.8:1 on E85 Build/

  3. #3
    Junior Member
    Join Date
    Feb 2014
    Location
    eagle pass
    Posts
    2

    black with kandy stripe
    98 ss camaro

    Yes I might of gotten the wrong numbers now that you say 317 that's what its got so there pretty good head then, would they fit a ls1 without having any problems.?

  4. #4
    Moderator 98TransAmWs-6's Avatar
    Join Date
    Apr 2010
    Location
    Fairfax, VA
    Posts
    3,596

    Black/ Silver
    98 TA WS6/ 01 C5 Corvette

    Yeah they fit no problem most guys if they are doing a naturally aspirated motor go the 243 heads route for the smaller chambers and if Forced Injection they go the 317 head route for the larger chambers. The head will work pretty well regardless though. Your compression ratio will be lower than that of a stock ls1 with stock heads though.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 03-16-2011, 10:30 AM
  2. Replies: 0
    Last Post: 02-04-2011, 03:00 PM
  3. AFR heads VS. Ported and beefed up stock heads.
    By hutcher04 in forum Internal Engine
    Replies: 10
    Last Post: 03-14-2010, 09:27 AM
  4. New Heads or Port/Polish Stock Heads?
    By Black02LS1 in forum Internal Engine
    Replies: 32
    Last Post: 06-23-2007, 12:29 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •