Results 1 to 5 of 5

looking for 400ish rwhp (cam help)

This is a discussion on looking for 400ish rwhp (cam help) within the Internal Engine forums, part of the LSx Technical Help Section category; i have a bone stock 2002 ss m6 and im looking to make hp in the 400 range im gonna ...

  1. #1
    Join Date
    Sep 2010
    oklahoma city

    Pewter & Mystic Teal!
    2002 CAMARO SS & 1999 TA

    looking for 400ish rwhp (cam help)

    i have a bone stock 2002 ss m6 and im looking to make hp in the 400 range

    im gonna do full exhaust and other mods

    but im new to the ls1 would and have no idea what cam to go with

    everyone i know says ms4 or ms3 but what i looked up these cams aint to streetable

    maybe a torquer 2 or 3 cam....or something else???

    any info will help

    like i said im new to the ls world and need all the info i can get


  2. #2
    Senior Member Z28boy2000's Avatar
    Join Date
    Jun 2008
    Rochester, NY
    2000 Camaro B4C

    picking a cam that will get you close to 400hp is going to need one hell of a tune to be truly streetable (but then again everyone has their own definition of streetable) The MS3 is a very powerful cam and should put you close to 400. The torquer 2 (which I run) is a great cam for making pretty good power last dyno i had i was at 380.

  3. #3
    Member 35thz28camaro's Avatar
    Join Date
    Jul 2007
    2002 z28 camaro

    i had a ms4 cam and made 401 with a 4000 stalled auto. it was my DD

  4. #4
    Member Blue28's Avatar
    Join Date
    Nov 2007

    Navy Blue
    1999 Camaro Z28

    FMS-F11-112 - 228"/230" .576"/.595" 112LSA - 2200-6600 RPM range.
    FMS-F13-112 - 230"/232" .595"/.585" 112LSA - 2500-6800 RPM range.
    FMS-F14-112 - 232"/234" .598"/.598" 112LSA - 2600-7000 RPM range.

    Texas Speed Torquer v.2
    Texas Speed 233/239
    or a custom TSP
    230/230 112lsa w/XFI lobes, or a 230/236 112lsa w/XFI lobes.

    All of these would be streetable, but the 228, and 230 intake durations a little more.
    Last edited by Blue28; 10-24-2010 at 12:36 PM.

  5. #5
    Member Rob Mellinger's Avatar
    Join Date
    May 2008
    Roanoke, VA

    1998 Trans Am m6


    TR230/224, good street cam. Good torque range you can feel. Pulls real hard from 3000-6600.
    LS6 intake,B&M short shift, Pacesetter ceramic lt, ory, umi subframe connectors, umi lca, slp lid, tr 230 cam, comp 918 springs,centerforce dual friction clutch, Frost tune.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Guys. There is no BEST Cam.
    By Hi-Po in forum Internal Engine
    Replies: 38
    Last Post: 09-05-2009, 08:48 PM
  2. 56cc Lingenfelter CNC'd heads. What cam?
    By Hi-Po in forum Internal Engine
    Replies: 141
    Last Post: 04-16-2009, 10:53 PM
  3. Dyno Listing
    By Mr. Luos in forum Dyno Information
    Replies: 1
    Last Post: 02-16-2009, 07:10 AM
  4. LS1 Hot Cam Kit
    By jpn8801 in forum Internal Engine
    Replies: 9
    Last Post: 08-11-2007, 07:54 PM
  5. Need ideas for Cam on my set-up
    By onefastss223 in forum Forced Induction
    Replies: 9
    Last Post: 10-22-2005, 05:15 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts