Results 1 to 3 of 3
Thread: LM7 Swap Torque goals
-
09-07-2017, 02:30 PM #1
- Join Date
- Sep 2017
- Age
- 31
- Posts
- 5
LM7 Swap Torque goals
So I've done a bit of research and I'm having troubles finding a lot of good info on the combo I'm thinking of...
In the middle of doing a LM7 swap into my '79 K20 with a 4l60e and it turns out the LM7 I got needs a rebuild. So while it's apart I'm thinking of doing a cam swap and possibly porting/polishing. I know it would be simpler and possibly cheaper to find a low mileage 6.0 but I'm going to stick with the 5.3.
I had a 1500HD with the 6.0 and I loved how that thing had torque for days... so I'm going mainly for upgrades to bump up the torque of the 5.3. I'd like to be at high 300's or low 400's at the flywheel in the torque department.
Anyone out there have recommendations how to achieve that number? From what I've read I'm thinking the right cam and some long tube headers should get me pretty close to that, but I'm not sure if the porting is a good idea or not. If it had a little idle lope that wouldn't be the end of the world either.
Thanks!
Sent from my iPhone using Tapatalk
-
09-15-2017, 02:37 PM #2
- Join Date
- Sep 2017
- Age
- 31
- Posts
- 5
Nobody has any thoughts?
Sent from my iPhone using Tapatalk
-
09-19-2017, 11:21 AM #3
- Join Date
- Sep 2017
- Age
- 31
- Posts
- 5
Anyone?
Sent from my iPhone using Tapatalk
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
LS1 Swap Goals
By 70_ss in forum Internal EngineReplies: 5Last Post: 03-21-2010, 02:11 PM -
torque arm for t56 swap
By chm2001z in forum Manual TransmissionReplies: 2Last Post: 01-06-2009, 08:50 AM -
NFL Field Goals
By snaggeltooth in forum Almost Anything GoesReplies: 21Last Post: 10-27-2007, 12:09 PM -
Ok what are your 07 goals ?
By Speedy_Gonzales in forum Almost Anything GoesReplies: 15Last Post: 01-03-2007, 11:40 AM
Bookmarks