Results 1 to 3 of 3

Can u look at my combo??

This is a discussion on Can u look at my combo?? within the Internal Engine forums, part of the LSx Technical Help Section category; Hello, Im new here and wanted some advice. I am wanting to know if what I have is on track ...

  1. #1
    Junior Member
    Join Date
    Sep 2006
    Rock Island, IL

    1999 SS Camaro

    Can u look at my combo??

    Hello, Im new here and wanted some advice. I am wanting to know if what I have is on track or if I am Short on HP and torque for what I have.

    1999 ss camaro, nine inch 3.73, th400 3800 stall and 408 iron block.

    Heads are 243 castings with port work from Jason at Bully performance, they flow 320 at .600 in. and 230 at 600 ex. 2.05 valves 1.60. Comp cams dual valve springs and comp cam 605/612 lift hdry roller.

    ls6 intake, 42lb injectors,STOCK fuel pump and rails,

    Pacesetter 1 3/4 headers with y-pipe and full exhaust.

    Mail order tune not been to the dyno yet.

    Underdrive pulley and no air conditioning.

    The car ran 11.28 at 119mph but I am thinking there should be alot more in it, I hope.

    Looking for suggestions on upgrades. Thanks Rich

  2. #2
    Senior Member ss~zoso~ss's Avatar
    Join Date
    Dec 2004

    SS: NBM, tan top
    1998-SS, 2010 Jetta TDI

    cant tell if you're short on hp or tq if you havent dynoed yet

  3. #3
    member since may 2000 nhraformula's Avatar
    Join Date
    Dec 2002
    n/w chicago

    2000 nhra edition formula

    you should be lower 11s high 10s.
    either way, shell out the money for a tune and take it to speedinc.
    they are here in illinois.
    2000 nhra edition formula
    a few bolt ons, 379 rwhp
    11.96 @113.25

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts