Cam Spec Question

**PFM** · 09-22-2009, 12:15 PM

I bought a new GM crate motor a few years back. It was listed as a 2001 Corvette motor and came with the vette and the f body oil pan. I believe it was a 350hp/385 torque motor. When I bought it I took out the stock cam and put in a TSP grind. Does anybody have the specs on the cam that i took out? Somebody told me it would be a good upgrade for a 5.3 motor, but I hate to sell somebody something without knowing the specs. I checked the cam thread posted for the stock motors but the GM crate motor specs aren't listed.

**Hi-Po** · 09-22-2009, 03:25 PM

http://www.ls1.com/forums/showthread...1998+stock+cam

If you need anymore information on stock cams sizes... the search will for sure bring up some results.

**PFM** · 09-23-2009, 06:01 AM

Originally Posted by Hi-Po

http://www.ls1.com/forums/showthread...1998+stock+cam

If you need anymore information on stock cams sizes... the search will for sure bring up some results.

Like I said I have already looked at the link posted previously. This is not the STOCK 98 MOTOR. This is an aftermarket GM crate motor. I'm thinking it is the 218 int/204 ex 551/55 lift on a 117 which would make it a great upgrade for the stock 5.3 motors.

**Hi-Po** · 09-23-2009, 06:08 AM

Originally Posted by PFM

Like I said I have already looked at the link posted previously. This is not the STOCK 98 MOTOR. This is an aftermarket GM crate motor. I'm thinking it is the 218 int/204 ex 551/55 lift on a 117 which would make it a great upgrade for the stock 5.3 motors.

I honestly didnt read that far into the post.