Currently building a project motor and im a little stumped on cam selection

the motor is a 5.3l LM7 stock short block, stage 2.5 ls6 prc heads and a typhoon 96mm intake that have been port matched to the heads
the heads are 64cc for those wondering.

ive been looking into the 230's duration and mid to high 500's lift just wasnt sure if there was a build similar to this making decent power.

any advice would help cause i know enough to get into trouble but not much on the numbers side of everything

this will be in a streetable car so i dont need anything too crazy just something thats good throughout the power band