Page 2 of 4 FirstFirst 1234 LastLast
Results 21 to 40 of 64

CAM POLL!!! Whats the Camshaft you went with??

This is a discussion on CAM POLL!!! Whats the Camshaft you went with?? within the Internal Engine forums, part of the LSx Technical Help Section category; Originally Posted by jiveass stock...cant beat the reliability..and the cost...plus theres nothin like a dyno sheet proving you got a ...

  1. #21
    Army Dude robcas47's Avatar
    Join Date
    Nov 2007
    Location
    Ft. Rucker Area, Lower AL
    Posts
    674

    Arctic White
    01 TA / 06 Duc 749D

    Quote Originally Posted by jiveass View Post
    stock...cant beat the reliability..and the cost...plus theres nothin like a dyno sheet proving you got a stock cam and hp numbers...and not having to have a stall or upgraded springs or intake or all that dumb stuff that makes everyone go faster than me... stock cam ftw?
    One of the funniest posts I've read in awhile here.
    Here's a couple vids of my setup. The first was done with just a street tune, the tune was done later on and setup to idle at around 950 so it sounds very simular. This cam would obviously make better power if/when I get better heads and either port or replace the intake.



    Here's one during the dyno, sorry the camera mic sucks.


    ASA Cam, Built A4, 3500 Stall, LT's, ORY, Hooker CB, E Cut-out, Lid, Modified SSRA, , SFC's,UMI Tq Arm w/relo, Spohn LCA's, 3.73's, Free Mods, Dyno tuned by James @ SpeedShift Performance. Need more suspension mods!!!

  2. #22
    Member pop6482's Avatar
    Join Date
    Oct 2010
    Location
    Wilkes-Barre Pa.
    Posts
    135

    Red/Black
    1989 Camaro IROC

    6.0 LQ4, Manley rods & pistons, TSP Torquer V2, PRC 5.3 Ported Heads, Spec stage 2 clutch. Motor is currently at the shop getting pieced together for my 3rd gen lsx swap.

  3. #23
    Senior Member 98maro's Avatar
    Join Date
    Feb 2010
    Location
    north bay california
    Age
    28
    Posts
    2,973

    Black
    00 camaro ss M6 #6695

    i like this thread! if you guys could also post the hp if you guys know what u have..

    228r seems to be a popular cam, thinking on getting that for mine...

  4. #24
    Army Dude robcas47's Avatar
    Join Date
    Nov 2007
    Location
    Ft. Rucker Area, Lower AL
    Posts
    674

    Arctic White
    01 TA / 06 Duc 749D

    I didn't get the dyno sheet but the TA put down 378rwhp and about the same for TQ.

  5. #25
    Sold: LS1 '85 El Camino ls1camino's Avatar
    Join Date
    Dec 2005
    Location
    Laurel, Maryland
    Posts
    4,977

    2000 Grand Prix GTP
    2000 Trans Am WS6 M6

    I put down 445rwhp and 395rwtq through a T56 and Moser 9".

    Torquer V.2 cam, Stage 2.5 5.3L Heads, and a FAST90/90 setup.

  6. #26
    Drop&Drag matt evans's Avatar
    Join Date
    Jan 2010
    Location
    clyde nc
    Posts
    287

    black
    02 Z28 and 00 SS

    Im very impressed with how well this thread is doing. thanks for all thats participating!

  7. #27
    Senior Member cpop98ws6's Avatar
    Join Date
    May 2010
    Location
    Wilkes-Barre, PA
    Posts
    1,545

    Black/Black
    98 WS6/04 Sierra Dmax

    383 ls1,Torquer v2, stock head (ported) ls6 intake, a4 3600 stall
    430rwhp 428rwtq
    Callies 383, Trick Flow 225, Rapid Motorsports Dominatior 2 X cam, ls6 ported oil pump,42lb injectors, FAST 92/92 , ASP underdrive pully, eletric water pump, Pacesetter LT's, Pacesetter ORY, Magnaflow catback, e-cutout, Yank SS 3600, Performabuilt stage 2 4l60e, Strange S60 ,4.10s, Detroit Truetrac, (UMI) - Adj. LCA, Adj. tunnel mount torque arm, Adj. panhard bar, Drag bar, subframe conectors, shock tower brace. 465rwhp-438rwtq 11.09@119.90.

  8. #28
    Army Dude robcas47's Avatar
    Join Date
    Nov 2007
    Location
    Ft. Rucker Area, Lower AL
    Posts
    674

    Arctic White
    01 TA / 06 Duc 749D

    Quote Originally Posted by ls1camino View Post
    I put down 445rwhp and 395rwtq through a T56 and Moser 9".

    Torquer V.2 cam, Stage 2.5 5.3L Heads, and a FAST90/90 setup.
    What about the GTP? Please post GTP numbers

  9. #29
    Sold: LS1 '85 El Camino ls1camino's Avatar
    Join Date
    Dec 2005
    Location
    Laurel, Maryland
    Posts
    4,977

    2000 Grand Prix GTP
    2000 Trans Am WS6 M6

    Quote Originally Posted by robcas47 View Post
    What about the GTP? Please post GTP numbers
    I don't have any. The dyno day I was going to go to a few months ago got canceled due to that freak snowstorm that hit PA in late October.

    She runs 13.7@99 w/ a 1.9sec 60' while spinning through the 100' on street tires. That is the best info I can give you

  10. #30
    Senior Member cpop98ws6's Avatar
    Join Date
    May 2010
    Location
    Wilkes-Barre, PA
    Posts
    1,545

    Black/Black
    98 WS6/04 Sierra Dmax

    Here is mine idling.

  11. #31
    cutting and welding mark21742's Avatar
    Join Date
    Mar 2008
    Location
    mercersburg pa
    Posts
    6,443

    hugger orange
    2004

    Sounds great cpop! What compression and exhaust are you running?

  12. #32
    Senior Member cpop98ws6's Avatar
    Join Date
    May 2010
    Location
    Wilkes-Barre, PA
    Posts
    1,545

    Black/Black
    98 WS6/04 Sierra Dmax

    Thanks Mark! Its around stock compression. It has pacesetter headers, pacesetter ORY and magnaflow catback.

  13. #33
    Drop&Drag matt evans's Avatar
    Join Date
    Jan 2010
    Location
    clyde nc
    Posts
    287

    black
    02 Z28 and 00 SS

    this is my 02 z28 with the ms4 cam, yank ss3600 stall and UMI full rear suspension SFC torque arm relocation, lowered with summit springs. Best time so far a 7.76 at 93 mph with a 1.7 60ft on street tires. still needs tuning. Exhaust is Pacesetter LTs with true duals and glasspacks at the axle.
    this video is a cold start. i didnt get to get a good video it started to rain.

    this video it was more warmed up and at idle

  14. #34
    Drop&Drag matt evans's Avatar
    Join Date
    Jan 2010
    Location
    clyde nc
    Posts
    287

    black
    02 Z28 and 00 SS

    this is my 00 SS. not real sure what cam is in it because supposedly it was bonestock with the exception of SLP longtubes. I changed the exhaust to True duals,x-pipe and glasspacks and it really opened the car up and ran 100% better. No times yet for this one but when the track opens up ill have some for sure
    Last edited by matt evans; 12-22-2011 at 06:00 PM.

  15. #35
    Member
    Join Date
    Apr 2010
    Location
    hawaii
    Posts
    117

    black
    2001 camaro ss

    tsp 233/239 113 with supporting mods,
    full boltons,
    ss3600,
    put down 378/345 to the wheels,
    converter unlocked

  16. #36
    Member
    Join Date
    Apr 2010
    Location
    hawaii
    Posts
    117

    black
    2001 camaro ss

    and it pulled like a freakin freight train from the time the converter grabbed till about 6,500

  17. #37
    Member xssv's Avatar
    Join Date
    Sep 2010
    Location
    Michigan
    Posts
    312
    01 SS

    .25x/.26x .66X 115 ......if I remember correctly. Headed into cam #3 early 2012.

    Btw, going into 460" RHS block for a '01 SS
    Last edited by xssv; 12-29-2011 at 05:20 PM.

  18. #38
    cutting and welding mark21742's Avatar
    Join Date
    Mar 2008
    Location
    mercersburg pa
    Posts
    6,443

    hugger orange
    2004

    Quote Originally Posted by xssv View Post
    .25x/.26x .66X 115 ......if I remember correctly. Headed into cam #3 early 2012.

    Btw, going into 460" RHS block for a '01 SS
    My 408 is wicked as hell.....I couldn't imagine a 460 lol. Sounds like we have about the sane came other than your a little higher on lift (mine is .624 lift) I never had mine on a dyno, but with my Edelbrock proflo it pulled right up to my 8,000 rpm fuel cut.....what intake are you running, and if you had yours on a dyno what rpm did it start to drop off? For $369 I absolutely love my intake, but to run it in an F-body I think you might half to even notch the windsheild. (10.75" tall)

  19. #39
    Moderator 35th-ANV-SS's Avatar
    Join Date
    Oct 2008
    Location
    Wherever life takes me
    Posts
    12,465

    Red
    02 35th LE Camaro SS

    Stock heads/cam/intake


  20. #40
    Member xssv's Avatar
    Join Date
    Sep 2010
    Location
    Michigan
    Posts
    312
    01 SS

    Quote Originally Posted by mark21742 View Post
    My 408 is wicked as hell.....I couldn't imagine a 460 lol. Sounds like we have about the sane came other than your a little higher on lift (mine is .624 lift) I never had mine on a dyno, but with my Edelbrock proflo it pulled right up to my 8,000 rpm fuel cut.....what intake are you running, and if you had yours on a dyno what rpm did it start to drop off? For $369 I absolutely love my intake, but to run it in an F-body I think you might half to even notch the windsheild. (10.75" tall)
    Engine is still at the shop. To date it pulled 803hp and 700ft lbs. peak power was at 6500......

    Mast Inline heads and a Kinsler ITB are the keys to this beast....

Page 2 of 4 FirstFirst 1234 LastLast

LinkBacks (?)

  1. 12-27-2011, 04:52 AM
  2. 12-26-2011, 11:07 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Camshaft help
    By askkmb in forum Internal Engine
    Replies: 0
    Last Post: 07-17-2012, 06:47 PM
  2. whats the best sleeper camshaft
    By cheeseburger in forum Internal Engine
    Replies: 5
    Last Post: 04-17-2010, 04:33 PM
  3. Camshaft
    By joker_01z28 in forum Internal Engine
    Replies: 26
    Last Post: 11-24-2007, 03:54 PM
  4. poll: whats your party??
    By tonyjnjz in forum Political / Debate Forum
    Replies: 24
    Last Post: 01-31-2007, 01:26 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •