383 stoker

**joe915** · 02-10-2011, 10:39 AM

hey guys i'm not on to much but i got an 2001 trans am that i'm about to put on some ls6 heads milled to 62cc with a cam that has 236/242 duration and .616/.615 lift.

i was interested in putting a 383 stoker kit on later in the future. would i be able to use these same heads/cam? i don't know a whole lot so any advice would be great. thanks everyone

**pajeff02** · 02-10-2011, 06:36 PM

I am going to move this to the Internal Engine section of the forum. You'll probably receive more feedback on your questions in that area.

**1nasty86** · 02-12-2011, 10:24 PM

Originally Posted by joe915

hey guys i'm not on to much but i got an 2001 trans am that i'm about to put on some ls6 heads milled to 62cc with a cam that has 236/242 duration and .616/.615 lift.

i was interested in putting a 383 stoker kit on later in the future. would i be able to use these same heads/cam? i don't know a whole lot so any advice would be great. thanks everyone

you can use the 383 kit with those heads. just make sure you check ptv clearance!