Is a 230 cam to big for a DD?

[rajiv1998]

Is a cam in the 230's with a .590-600ish lift on a 112LSA to much for a DD. I ask becasue my car is sold and my nxt project will def have H/C if not a stroker. (depending on the size of the stroker my cam specs will vary) but i might do a h/c and keep it N/A. What cams is every1 else running. How much power are u making with or without heads? Do u guys have peak power power throughout the RPM range. Gas milage? Anything at all you can contribute. How street friendly is it?

Iv done research and im really impressed by the TSP cams. (not the MS4) Also vengence and Futral seem to make cams what im looking for. Or should i just go with a custom grind cam?

[98formy]

If you check out my sig, I DD my car all the time, loved it

[Mr. Luos]

Depends on your tolerance and the tune.

[shady milkman]

Depends on your tolerance and the tune.

x2...if your a pansy and cant handle power and speed...like my colleague Mr. Luos then it is wayyy to much cam..but if your a man and piss excellence and testosterone like me then your set

[CamaroFan71]

x2...if your a pansy and cant handle power and speed...like my colleague Mr. Luos then it is wayyy to much cam..but if your a man and piss excellence and testosterone like me then your set

Hahahaha

[Mr. Luos]

x2...if your a pansy and cant handle power and speed...like my colleague Mr. Luos then it is wayyy to much cam..but if your a man and piss excellence and testosterone like me then your set

Your cam = stock
My cam = 248/254

[shady milkman]

Your cam = stock
My cam = 248/254

touche'

[rajiv1998]

the car is a 6-speed to. Most likley ill have a 9"/12 bolt with 4.11's

[Hi-Po]

your cam = stock
my cam = 248/254

burrrrnnnnnn!!!!