Page 1 of 2 12 LastLast
Results 1 to 20 of 34

My mods are to Long to post in my Sig. READY?

This is a discussion on My mods are to Long to post in my Sig. READY? within the Member's Rides forums, part of the Off - Topic / Discussion forums category; 402 Ci Ls2, Trick flow top secret heads Dart Iron liners, Street cam spece'd out by me made entirely of ...

  1. #1
    402 Guru 402 Guru's Avatar
    Join Date
    Jan 2008
    Location
    las vegas
    Posts
    261

    Red
    02 Trans Am T-tops M6

    Exclamation My mods are to Long to post in my Sig. READY?

    402 Ci Ls2,
    Trick flow top secret heads
    Dart Iron liners,
    Street cam spece'd out by me made entirely of Chrome Molly ,
    Comp Cams Chrome Molly lifters,
    Comp Cams Crome Molly Rocker Arms ,
    Comp Cams Chrome Molly Pushrods ,
    6 -speed Viper Magnum T-56,
    1 off hood Fully functional composite material with Paint by Count Customs ,
    Build old school the real 10 bolt( 1974) Ready
    4 inch Aluminum Driveshaft Complements of Inland Empire,
    Dual-row Nitrated Chrome Molly Timing chain
    Medlings high flow Oil pump
    25% underdrive pully
    1-off Chrome molly 32 point Subframe connectors that will do a wheelie down the track and then come down for a new oil pan
    Edelbrock adjustable Torque arm chrome molly (Sp ordered)
    Hotchkis Coil over conversion kit
    Hotchkis boxed control arms
    Hotchkis Adjustable Panhard Bar
    Hotchkis front and rear Sway Bar
    Chrome Molly SkidPlate with some creative engineering
    Edelbrock Drag Race longtube speced out by the gm of edelbrock for the 1/4 mile .
    True Dual Over the Axle 4 and a half inch dual slach cut tips
    1-Off Guages Inside Arm Rest,
    Roasting z06's and zr1's Porche Gt2's eat my dust on the weekly with street tires. Long live American Muscle Im gathering some pics up will take more in the morning what mods do u guys have ?? ill post up some better pics tomorrow just the ones i have off my computer of the summer full of Racing i cant believe after converting the photos its all blurry and it looks like im racing on 20's haha there 17's
    Last edited by 402 Guru; 12-13-2009 at 02:42 PM. Reason: molly

  2. #2
    Military Muscle :usa: MYSCZ06's Avatar
    Join Date
    Aug 2005
    Location
    Columbia,SC
    Age
    44
    Posts
    511

    Millienum Yellow
    2003 Corvette Z06

    Got a few things--
    Exterior Body Mods Exterior--
    West Coast Muscle Cars MCM Carbon Fiber Hood
    Shorty Antenna
    Dark 5% Tint
    Fat Daddy's
    Lighting--
    ACA HIDs
    Lights Tinted STG 2 JW Motoring
    Tail Lights Halo Mod
    Front Markers Audi Mod
    All LED's Exterior Lights
    Engine Details F/I--
    D1SC Pro-Charger Polished 7lbs
    Vortech Mondo Bypass Valve
    Polished Brackets
    A&A FMIC
    Snow Performance Meth
    Catch can
    Internals--
    1.7 Harland Sharp Rockers
    Manley Hardened Push Rods
    Patriot "Gold" Springs
    Titanium Retainers
    Fuel--
    FAST 90mm Intake Ported by Vengeance Racing
    Nick Williams 90mm Ported Polished TB
    42lb Inj
    KB Boost a Pump
    Exhaust--
    American Racing Long Tube Headers & X-Pipe
    Corsa Touring Cat Back
    Interior Mods Interior--
    Auto Meter C2 Series Digital Gauges A/F
    Auto Meter C2 Series Boost Gauge
    Colored Interior Inserts (Yellow)
    Full Interior LED Upgrade (Blue)
    Redline Interior Enhancements (Yellow Stitching)
    Partition
    Vette Tray
    Window Valet
    Skull Shift Knob
    Lloyds Floor Mats
    Trunk Mat Z logo
    Wheels/Tires/BrakesWheels/Tires Wheels--
    CCW SP20A's Triple Chrome
    19x10 (front)
    19x11.5 (rear)
    Tires--
    TOYO's 285-30ZR19 T1R
    TOYO's 305-30ZR19 R888

  3. #3
    402 Guru 402 Guru's Avatar
    Join Date
    Jan 2008
    Location
    las vegas
    Posts
    261

    Red
    02 Trans Am T-tops M6

    put together very good. I didn't add also because i thought it would be bragging but hey here it goes.
    Dual valve springs with titanium retainers
    Dual-row nitrated Chrome Molly Timing chain
    Medlings high flow Oil pump
    25% underdrive pully
    1-off Chrome molly 32 point Subframe connectors that will do a wheelie down the track and then come down for a new oil pan
    Edelbrock adjustable Torque arm chrome molly (Sp ordered)
    Hotchkis Coil over conversion kit
    Hotchkis boxed control arms
    Hotchkis Adjustable Panhard Bar
    Hotchkis front and rear Sway Bar
    With a Chrome Molly SkidPlate with some creative engineering
    Edelbrock Drag Race longtube speced out by the gm of edelbrock for the 1/4 mile .
    and a True Dual(Full Exhaust) Over the Axle 4 and a half inch dual slach cut tips
    Last edited by 402 Guru; 12-02-2009 at 10:12 PM.

  4. #4
    402 Guru 402 Guru's Avatar
    Join Date
    Jan 2008
    Location
    las vegas
    Posts
    261

    Red
    02 Trans Am T-tops M6

    nice Corvette myscz06 !i like your mods i'm going to the airforce in january . which branch of the military are you in ?

  5. #5
    Military Muscle :usa: MYSCZ06's Avatar
    Join Date
    Aug 2005
    Location
    Columbia,SC
    Age
    44
    Posts
    511

    Millienum Yellow
    2003 Corvette Z06

    Quote Originally Posted by 402 Guru View Post
    nice Corvette myscz06 !i like your mods i'm going to the airforce in january . which branch of the military are you in ?
    Thanks...Active Army..congrats on the future enlistment!

  6. #6
    402 Guru 402 Guru's Avatar
    Join Date
    Jan 2008
    Location
    las vegas
    Posts
    261

    Red
    02 Trans Am T-tops M6

    Thanks how long did u have to wait to be called out to boot camp ?

  7. #7
    Member 1986camarojoe's Avatar
    Join Date
    Jan 2006
    Location
    Iowa
    Age
    31
    Posts
    340
    99 Z28 04 Corvette

    My vette has that same hood, cant remember the name. carbon fiber though

  8. #8
    Military Muscle :usa: MYSCZ06's Avatar
    Join Date
    Aug 2005
    Location
    Columbia,SC
    Age
    44
    Posts
    511

    Millienum Yellow
    2003 Corvette Z06

    yup carbon fiber MCM Hood. Supercharger hood

  9. #9
    Senior Member 00z28bubba's Avatar
    Join Date
    Dec 2007
    Location
    las vegas, nv
    Age
    29
    Posts
    1,390

    white
    2000 Z28

    it says red trans am but u have pics of my car lol. jk but i wouldnt be surprised if that really was my car. but your mods suggest otherwise. the only time i ran a red t/a was about a year ago. that was my third time at the track and i ran a 14.0 and the t/a ran a 14.1. he got the whole shot win though. but both of us ran on street tires and it was obvious by our horrible 60' times. both were 2.3xx
    2000 white z28, t-tops, free mods, intake, full exhaust, dyno tune, repro c5 z06 wheels, and some elbow grease here and there.

  10. #10
    402 Guru 402 Guru's Avatar
    Join Date
    Jan 2008
    Location
    las vegas
    Posts
    261

    Red
    02 Trans Am T-tops M6

    haha if only you saw the inside of my engine its kool u gotta get some more mods on the z28 bud.There are about 5 red trans ams out here in vegas but only 1 that looks like mine.Las Vegas's Top Dog Challenge and cars that run 11.5's minimum are allowed to enter anyways Dre what have u been up 2 man long time no talk . u still at RnR ? shit when i used to run street tires the good old days haha

  11. #11
    Senior Member 00z28bubba's Avatar
    Join Date
    Dec 2007
    Location
    las vegas, nv
    Age
    29
    Posts
    1,390

    white
    2000 Z28

    lol i read/answered the pm before i saw your post. i still see his car there. i live just east of nellis so i drive by there often. i dont know him really, but i have met him at an lvcfo meet. im not really a very active member there, but i try to check there site here and there at least. i dont really know most of there members outside of about 2 of their meets that ive been to.

  12. #12
    Junior Member
    Join Date
    Jul 2006
    Location
    Cedar, KS
    Age
    51
    Posts
    43

    Pewter Metallic
    2000 NHRA Trans Am

    Cool beans there!

  13. #13
    Junior Member BAMF TA's Avatar
    Join Date
    Dec 2009
    Location
    Fenton, MI
    Posts
    17

    Black
    2001 Trans Am

    Quote Originally Posted by 402 Guru View Post
    blah blah blah

    I think someone sounds a little too cocky...




    You hit 7s then you can talk...

  14. #14
    402 Guru 402 Guru's Avatar
    Join Date
    Jan 2008
    Location
    las vegas
    Posts
    261

    Red
    02 Trans Am T-tops M6

    Quote Originally Posted by BAMF TA View Post
    I think someone sounds a little too cocky...




    You hit 7s then you can talk...
    when you hit the 5.5 mark in the 1/4 then keep on dreamn about the parachutes , dont think your sorry TROLL
    Last edited by 402 Guru; 12-17-2009 at 11:48 AM.

  15. #15
    Junior Member BAMF TA's Avatar
    Join Date
    Dec 2009
    Location
    Fenton, MI
    Posts
    17

    Black
    2001 Trans Am

    Quote Originally Posted by 402 Guru View Post
    when you hit the 5.5 mark in the 1/4 then keep on dreamn about the parachutes , dont think your sorry TROLL
    What are you smoking.... wow!


    BTW... My car would destroy yours. So... STFU

  16. #16
    Just me Y2KPewterSS's Avatar
    Join Date
    Nov 2006
    Location
    Broken Arrow, OK
    Age
    42
    Posts
    23,353

    Pewter metallic
    2000 Camaro SS

    Both of you guys need to take a chill pill. If this nonsense persists, I will lock the thread.

  17. #17
    Junior Member BAMF TA's Avatar
    Join Date
    Dec 2009
    Location
    Fenton, MI
    Posts
    17

    Black
    2001 Trans Am

    I just didnt understand what he was saying... but im done. dont worry

  18. #18
    402 Guru 402 Guru's Avatar
    Join Date
    Jan 2008
    Location
    las vegas
    Posts
    261

    Red
    02 Trans Am T-tops M6

    ok mod.np. trolls need ls1tech .. keep dreaming "KID" post up your mods then good luck you will need it with a 200 mph trailwind . u need a box of tissues 4 ur issues lol

  19. #19
    402 Guru 402 Guru's Avatar
    Join Date
    Jan 2008
    Location
    las vegas
    Posts
    261

    Red
    02 Trans Am T-tops M6

    everyone post up your modifications big or small

  20. #20
    Junior Member BAMF TA's Avatar
    Join Date
    Dec 2009
    Location
    Fenton, MI
    Posts
    17

    Black
    2001 Trans Am

    I just remembered that all of my mods are to long to fit in MY sig.


    454 LSX HKE Shortblock
    LS7 Heads
    Stock Valves
    Custom Cam 248/254 ~.680 Lift 110LSA
    PRC .700" Lift Springs
    Morel Lifters
    Custom Hardened Pushrods
    Harland Sharp LS7 Rockers
    Cometic .041 Heads Gaskets
    ARP Heads Bolts
    Head Bolts Torqued To Proper Torque
    Rocker Bolts from GM
    Valve Covers
    LS7 Intake
    FAST 92mm TB
    Non-TCS Throttle Cable
    Spohn Solid Motor Mounts
    Engine Harness Re-Wrapped
    Computer Re-Located Inside
    All Wires Removed From Engine Bay
    Engine Bay Seam Welded
    Engine Bay Smoothed
    Fuse Boxes Relocated
    Battery Relocated
    ABS Delete
    SJM LL Custom Kit
    Custom Coolant Overflow
    Custom Clutch Reservoir
    HVAC Delete
    HID Hi/Lo/Fogs
    SPEC Stage 3+ Clutch
    Fidanza Alum. Flywheel
    Stock Trans
    Fabbed 9" W/ 35sp 4.56s And Wavetrac STC
    Fabbed Suspension
    Lowered on Sportlines
    Hopefully some Koni 4/4s STC
    Wolfe 8pt Roll Bar
    Re-Wrapped Leather Interior
    Dye Interior Plastics
    Carbon Fiber Wrapped Interior Pieces STC
    Custom Leather Shift Boot
    C6Z CF Shift Knob
    Re-Wrapped Steering Wheel
    CF T-Tops
    De-Badged
    5% Tints All Around
    Tinted Tails
    Tinted Marker/Side Lights
    Custom Powdercoated Wheels
    18x10.5" C5Z Front Wheels
    315/35-18 Hoosier R6 Front Tires
    18x12.5" C5Z Rear Wheels
    345/30-18 Hoosier R6 Rear Tires

    I forgot that this shortblock can handle a 300 shot of nitrous if I want.

    This combo should be good for high 9s on motor, high 8s on the spray


    Have fun running 11.5s...

    Im sure im forgetting ALOT! but i dont wanna make you guys too jealous
    Last edited by BAMF TA; 12-18-2009 at 12:00 PM.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Top Justice Deputy Cole Said Ready to Leave Post
    By theorangeguy in forum Political / Debate Forum
    Replies: 1
    Last Post: 10-16-2014, 05:52 PM
  2. Ready to do some mods
    By Orp0408 in forum Firebird / WS6
    Replies: 8
    Last Post: 02-17-2011, 09:07 AM
  3. Long time lurker, 1st post
    By GoFast908Z in forum New Member Introductions
    Replies: 4
    Last Post: 03-01-2010, 06:43 PM
  4. Ready for my Mods to begin...!
    By SVG210 in forum Internal Engine
    Replies: 15
    Last Post: 03-26-2008, 11:00 AM
  5. spark rattle(long post but appreciate any help)
    By ss2001z in forum General Help
    Replies: 2
    Last Post: 12-05-2005, 03:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •