Results 1 to 16 of 16
Thread: My 98 Z28 build thread...
-
05-09-2014, 06:06 AM #1
- Join Date
- Apr 2014
- Location
- Tavares, FL
- Posts
- 58
Blue- 1998 Camaro Z28
My 98 Z28 build thread...
Bought my car about 2 weeks ago. I had a 88 IROC Z28 but had to sell it after a motorcycle accident. Recently I was hit on my bike again and used the money from the bike to buy a 98 Z28. Since Ive had it I have replaced the radio with a Kenwood X-586, replaced the fuel filter, knock sensors, and oil pressure sending unit. I also replaced the 2 front calipers as the were starting to hang up. Have somethings in mind for the next few weeks. Hope ya'll enjoy. People on here have already been so helpful. Thank you
-
05-09-2014, 06:52 AM #2
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,759
Navy Blue Metallic- 98 T/A w/ mods, 00 FBVert
Sweet looking 98 Sean.
-
05-10-2014, 04:36 PM #3
- Join Date
- Apr 2014
- Location
- Tavares, FL
- Posts
- 58
Blue- 1998 Camaro Z28
Thank you. Rims and tires and tint should be on it in about 2 weeks. Then doing headers and exhaust in a few more weeks. Just gtta wait for my friend to have time to help.
-
05-22-2014, 11:24 AM #4
- Join Date
- Apr 2014
- Location
- Tavares, FL
- Posts
- 58
Blue- 1998 Camaro Z28
-
05-22-2014, 11:43 AM #5
- Join Date
- Feb 2009
- Location
- Florida Man Status Acheivement
- Posts
- 11,759
Navy Blue Metallic- 98 T/A w/ mods, 00 FBVert
Be careful if you're caught out in the rain. That ram air scoop acts like a ramp into the intake if you hit a deep enough puddle.
I like the new lights, it's the one thing I hate on my Trans Am.
-
05-22-2014, 11:56 AM #6
- Join Date
- Apr 2014
- Location
- Tavares, FL
- Posts
- 58
Blue- 1998 Camaro Z28
I probably won't ride to much in the rain. Got my truck for that. getting some more goodies later this week.
When i installed the intake I was not sure where the rubber seal goes.
Gotta get the halos hooked up
-
05-29-2014, 04:21 PM #7
- Join Date
- Apr 2014
- Location
- Tavares, FL
- Posts
- 58
Blue- 1998 Camaro Z28
-
05-30-2014, 02:14 AM #8
Congrats! Sharp looking car.
The brake caliper pins like to seize up on our cars. Any time you service the brakes, pull the pins and clean both the pins and the bores. Then put it all back together with a generous dose of synthetic caliper grease.
-
05-30-2014, 02:10 PM #9
- Join Date
- Apr 2014
- Location
- Tavares, FL
- Posts
- 58
Blue- 1998 Camaro Z28
Thank you. I am gong to pull the left front soon. Howling like a banshee. Really is embarrassing, car looks good but the sound takes away from that, lol.
-
06-02-2014, 09:54 PM #10
Welcome to the site and congrats on the car
-
06-12-2014, 09:15 AM #11
- Join Date
- Feb 2012
- Location
- State College, Pa
- Posts
- 14
I like the color, nice car!
-
06-12-2014, 10:19 AM #12
- Join Date
- Apr 2014
- Location
- Tavares, FL
- Posts
- 58
Blue- 1998 Camaro Z28
Thank you everybody. Looking to finish the exhaust and get a tune. Just don't wanna spend the money, lol
-
06-12-2014, 12:54 PM #13
I don't like thinking about what I spent on our exhaust system. The sound and look and is exactly what I had hoped for though.
-
07-26-2014, 01:28 PM #14
- Join Date
- Apr 2014
- Location
- Tavares, FL
- Posts
- 58
Blue- 1998 Camaro Z28
So I recently deleted the egr/air. Sent the PCM to frost to get it tuned. Can't wait to get it back. Also took out the BCM and had a friend fix the solder point in it. Hopefully as is well when I get the computer back.
-
07-26-2014, 04:00 PM #15
Remember that it'll take a bit for things to settle in. On initial start up the engine may run like crap or even stall.
-
08-02-2014, 01:24 PM #16
- Join Date
- Apr 2014
- Location
- Tavares, FL
- Posts
- 58
Blue- 1998 Camaro Z28
Got the tuned PCM in. Runs great. Started right up. Changed out the PS pump and pressure hose today.
Last edited by ChevyZ76; 08-02-2014 at 01:34 PM.
1998 Z28: SLP Ram Air, SLP Loud Mouth 2 Exhasut, P&P Throttle Body, Tuned By Frost, KYB Adjustable Shocks and Struts, Eibach Sway Bar, EGR/AIR Delete
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Another Build Thread
By kenro23 in forum Member's RidesReplies: 77Last Post: 06-12-2014, 09:15 AM -
LQ4 Turbo Build Thread
By My00Z28 in forum Forced InductionReplies: 89Last Post: 08-28-2013, 12:41 PM -
Build Thread 2.0
By tep98ws6 in forum Internal EngineReplies: 23Last Post: 08-07-2013, 06:56 AM -
Members build thread
By 10spokess in forum Request and FeedbackReplies: 14Last Post: 07-21-2011, 07:21 AM -
My Build Thread!
By tep98ws6 in forum Internal EngineReplies: 236Last Post: 07-17-2010, 07:56 AM
Bookmarks