Results 1 to 2 of 2

what to do

This is a discussion on what to do within the V6 forums, part of the Vehicle Specific category; i have a 86 camaro that had a 2.8 and a 5 speed. i sold the engine and trans in ...

  1. #1
    igofast Brandon35thSS's Avatar
    Join Date
    Nov 2005
    Location
    ALABAMA
    Age
    39
    Posts
    50

    red with 35th le stripes
    2002 35TH LE

    what to do

    i have a 86 camaro that had a 2.8 and a 5 speed. i sold the engine and trans in order to swap to a sbc and a th350. i have the v8 motor mounts allready,and the block. can any one tell me what else i need. oh yeah i also have a th400 and i was told that it wouldnt work with the stock v6 driveshaft cause the tranny is a long tailshaft. any help is apreciated!

  2. #2
    Interceptor
    Guest
    you'll need a V8 rad as the V6 has water outlets on the wrong sides. Other than that it will be straight forward. If you are running a carbed SBC you'll need to modify the ignition coil wiring to work with the in cap HEI if thats the route you are going. I did a SBC swap on an 86 camaro when I was in tradeschool and it wasnt a hard swap. PM me if you need help.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •