Results 1 to 4 of 4

Side exausht(i cant spell)

This is a discussion on Side exausht(i cant spell) within the V6 forums, part of the Vehicle Specific category; well heres the deal im planning on making a custom exauhst setup in the neer future. and i am debating ...

  1. #1
    quicky06
    Guest

    Side exausht(i cant spell)

    well heres the deal im planning on making a custom exauhst setup in the neer future. and i am debating between going out the side before the wheel wells or going all the way out the back.

    either way it will be true duals with cats and bullet mufflers.

    what u think?

  2. #2
    The milks gone bad!! Devylyst's Avatar
    Join Date
    Nov 2005
    Location
    East Point, Ga
    Age
    35
    Posts
    110

    Red
    86 Z28

    I think this idea has been attempted before, but didnt work cause of the SFC before the rear wheels, but anything is possible.

  3. #3
    SUPREME member-oderator oneBADDz's Avatar
    Join Date
    Nov 2005
    Location
    Lost in Texas
    Age
    34
    Posts
    2,683

    Custom Slate Blue
    99 B4C

    http://ourworld.cs.com/jrp98ls1/Dual+1.jpg
    http://ourworld.cs.com/jrp98ls1/side+exit+1.jpg
    It's an LS1tech girl, other than that I don't know anything, but now you know how it looks coming out the side.

  4. #4
    Member ProwlerZ's Avatar
    Join Date
    Dec 2005
    Location
    Myrtle Beach
    Age
    33
    Posts
    404

    Silver
    2002 Z28

    In general the idea doesn't work very well. I had two systems bent for it, and you either run the system an inch off the ground, which will lead to the prompt removal of the exhaust system (if you're lucky, that would be all that comes off), or you route it back towards the front, cut to the sides just before the front axle, then weld subframe connectors in and use flat piping to run it back. This fit and looked well, but the fact that you are "U-ing" the pipes means your air-flow just goes to crap. You've also got to be careful with excess airflow, once you've heard a 6 cylinder with a cut-out, you'll know what I mean.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. No Need for Spell Check
    By 024mula in forum Almost Anything Goes
    Replies: 33
    Last Post: 11-12-2012, 11:03 AM
  2. Dry Spell
    By V8MUSCLE in forum Almost Anything Goes
    Replies: 69
    Last Post: 11-16-2010, 09:58 AM
  3. HPtuner, are there instructions that spell it out?
    By Firebirdjones in forum Computer & Tuning
    Replies: 23
    Last Post: 02-24-2007, 04:00 PM
  4. hey third shift... spell information for me
    By predator in forum Almost Anything Goes
    Replies: 4
    Last Post: 08-17-2006, 03:31 PM
  5. Babs has no spell checker
    By Element187 in forum Political / Debate Forum
    Replies: 16
    Last Post: 03-07-2006, 05:17 PM

Members who have read this thread: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •