Results 1 to 4 of 4

When making a hard left i hear a rubbing sounding noise???

This is a discussion on When making a hard left i hear a rubbing sounding noise??? within the Suspension and Handling forums, part of the General Help category; I have no klew what this noise is but what i head is when i cut the wheel left semi-hard ...

  1. #1
    Senior Member NeeD4SpeeD's Avatar
    Join Date
    Sep 2005
    Location
    New York, NY
    Posts
    1,720

    Collectors Edition Yellow
    2002 Pontiac Trans AM WS6

    When making a hard left i hear a rubbing sounding noise???

    I have no klew what this noise is but what i head is when i cut the wheel left semi-hard when comming around the turn and let say the turns are about 45 degrees... I hear what sounds to be a rubbing/groaning noise around the passenger front tire... .It DOESNT do this when i turn hard to the right only the left... Maybe the left shock is done and is creating too much body roll to that side i have no idea...... Any ideas???

  2. #2
    Member 01mmmz28's Avatar
    Join Date
    Dec 2005
    Location
    Hubert, NC
    Age
    42
    Posts
    140

    maroon
    2001 Z28

    1st, when parked, turn the wheels all the way so that you car see the fender well, look for scrap marks on the plactic shield inside the well, 2nd look at your tire for rubbing damage. Next, get a good alignment, and have the tech check your camber/toe angles. You may have that wheel off just enough to rub and this needs to be taked care of ASAP !!

  3. #3
    Senior Member NeeD4SpeeD's Avatar
    Join Date
    Sep 2005
    Location
    New York, NY
    Posts
    1,720

    Collectors Edition Yellow
    2002 Pontiac Trans AM WS6

    Yea i definatly need to figure out what it is... Oh and to make a correction... its when i make a sharp right turn that the left wheel makes noise... Dunno if that makes any difference but i will check tommrow to see if there is any rubbing..

  4. #4
    Senior Member mrr23's Avatar
    Join Date
    Jul 2005
    Location
    orlando, fl
    Posts
    7,134

    dark bowling green
    2000 corvette

    hub bearing most likely on the right side.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Making a hard choice
    By nomolos1 in forum Southern Members
    Replies: 5
    Last Post: 05-02-2011, 06:53 PM
  2. T-Top Squeak/Rubbing Noise
    By regerror6 in forum Firebird / WS6
    Replies: 15
    Last Post: 09-21-2008, 05:57 AM
  3. Pump sounding noise
    By gareth001 in forum Camaro / SS
    Replies: 3
    Last Post: 07-23-2007, 03:33 PM
  4. Slipping feel when making left turns.
    By seasponge in forum Drivetrain
    Replies: 4
    Last Post: 07-23-2007, 06:41 AM
  5. Tire rubbing noise during hard right corners.
    By Blkls1 in forum Suspension and Handling
    Replies: 1
    Last Post: 12-30-2005, 10:51 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •