Swaybar Size and Rear Suspension Q's!!

[TheGimp711]

I have a 00' WS6 6spd. and am curious of what size swaybars I have front and rear. I would like to recplace the bushings and endlinks.

I was also curious on people's opinions on torque arm and panhard bars for my car. Is a non-adjustable one worth it? Could I just replace the bushings with polyurethane ones?

Any opinions would be greatly appreciated...
Thanks,
Evan

[shady milkman]

ok talk to sam strano..or umi...get at least single adjustable for all suspension parts possible...the pan hard needs to be adjustable for centering your rear..becomes really important when you get rims or want to get your suspension tuned. if your stock and not having wheel hop ect issues..then dont worry about the torque arm.

[TheGimp711]

The car is very far from stock but I have no wheel hop issues and it launches nice and straight with the Nitto 555R's.
My car just hit 70k and I want to replaced the bushings and to stiffen up the rear a little bit.

I also would need to know the size of my swaybar so I can order bushings and endlinks...

Thanks,
Evan

[9T8W66]

WS6/SS front bars are 32mm and all V8 cars have a 19mm rear bar.
And even the stock ride height cars need an ADJ panhard bar.