Results 1 to 13 of 13
This is a discussion on Sway Bars within the Suspension and Handling forums, part of the General Help category; Are Eibach sway bars any good?...
03-21-2006, 07:05 AM #1
Are Eibach sway bars any good?
03-21-2006, 03:49 PM #2
03-21-2006, 04:12 PM #3
what size are they.... if they're 32 front 21 rear..you might wanna look at a set of stock SS bars...could save you some money..
I believe the stock SS bars are 32 front and 21 or 22 rear
03-21-2006, 05:14 PM #4
It says they are 35mm front and 25mm rear
03-21-2006, 05:51 PM #5
- Join Date
- Aug 2005
- Houston Texas
Black SVT & Silver WS6
- 2003 SVT Cobra & 2002 WS6
03-22-2006, 04:17 AM #6
25mm too big for rear bar - will make the car 'tail happy' go with 35mm front/21 or 22mm rear. Hollow bars will also save you weight over the solid versions.
03-23-2006, 02:31 PM #7
- Join Date
- Jun 2002
- Montreal, CANADA
- 2000 CamaroSS convertible
Eibach sway bars are 35/25.
What springs are you running ?
You need to be settled on the spring rates you like and then do swaybars, because it affects the spring rate when cornering, affecting the balance of the car.
So before we give you advice, you should tell us what springs/shocks you are using.
If by any chance you have stock springs, I'd suggest getting a big 35 front swaybar and keep rear stock one.
03-23-2006, 06:12 PM #8
I have KYB AGX struts and hotchkis springs
04-16-2006, 02:21 AM #9Originally Posted by BitViper
Stock SS sway bars are 30 F 19 R I should know I have a 2002 SS in my garage I also just upgraded the sway bars .The 1LE package which was done by SLP had 32 F 21 R . Just thought you would like to know .
Last edited by siggs229; 04-16-2006 at 11:56 PM.
05-06-2006, 01:32 PM #10
????????? what is tail happy ?????????????
05-06-2006, 07:35 PM #11
Tendancy to oversteer.Bowtie good! Blue oval not so good! Bob in the PRK
05-07-2006, 07:47 AM #12Originally Posted by Bowtie Guy
06-05-2006, 10:00 AM #13coolformulaGuest
Check out strano hollow bars 35mm and 22mm
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)