Results 1 to 5 of 5
-
04-18-2006, 10:34 AM #1qwik3rGuest
Q about stock torque arm and aftermarket
I was wondering if the stock TA bracket is re-used when you have an aftermarket TA, i can't remember. I have to convert back to stock and want to make sure incase i have to order the stock bracket again. Thanks.
-
04-18-2006, 01:33 PM #2
By bracket do you mean the "clamshell' for the bushing? If so just keep the new (poly?) bushing in and re-install your stocker.
A new bushing (aftermarket poly) can be ordered for about $15
-
04-18-2006, 03:59 PM #3qwik3rGuest
yes i mean the 2 peices that you put together and squeeze the rubber bushing around the torque arm where it attaches to the transmission. I have a stick btw.
My aftermarket torque arm has a rubber bushing that has a circular hole, my stock bushing (which is lost) has a rectangular hole to fit the rectangular end of the stock TA. I just wanted to confirm that the 2 peices that clamp the bushing together are re-used when you get an aftermarket TA, i know the bushings may vary but i'm talking about the bracket.
Again the reason being i presently have an AM TA on the car but it broke, have to take it off and replace with stock TA, can't remember (and haven't had a chance to look at it) if it is a stock bracket and if it will thus work with my stock bushing which i just ordered.
I didn't know u could just buy a stock bushing, where can you get it? I had to buy one side of the damn bracket from the dealer which supposedly comes with the bushing.
-
04-18-2006, 05:52 PM #4
Sorry I ment you can get a aftermarket bushing with the stock slot (m shape hole) from Moog (rubber) energy suspension (poly) and prothane (poly) you just re-use the bracket (clamshell).
Here is a link to one of the websites sponcers:
"47-7-1609 Prothane Polyurethane Torque Arm Bushing, 82-02 F-body $14.99"
http://www.thunderracing.com/catalog...&vid=4&pcid=92
Then you can sell your TA with the circular hole bushing.
-
04-19-2006, 06:42 AM #5qwik3rGuest
frigcrap i wish i could have seen that b4 i dished out like 30 bucks for the side half of the other bracket oh well atleast if it doesn't come with it i won't pay for it and i'll just get one from thunder, thanks again.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
WTB aftermarket torque arm
By Fury_786 in forum Parts Wanted / TradeReplies: 0Last Post: 04-29-2011, 05:15 PM -
aftermarket stock style torque arm
By JayTA98 in forum General HelpReplies: 5Last Post: 07-10-2010, 10:15 AM -
Stock or aftermarket ECM
By ATyler in forum Computer & TuningReplies: 6Last Post: 11-19-2008, 05:05 PM -
WTB: Aftermarket Torque Arm
By SexOnWheels in forum Parts Wanted / TradeReplies: 0Last Post: 11-27-2005, 11:44 AM -
stock and a little aftermarket
By raginazn616 in forum Parts For Sale / TradeReplies: 0Last Post: 10-03-2005, 06:42 PM
Members who have read this thread: 0
There are no members to list at the moment.
Bookmarks