Results 1 to 20 of 23
-
06-11-2010, 02:20 PM #1
finaly cashed out for suspension!
UMI order plus shipping= almost $3000
-1982 - 2002 GM F-Body Transmission Mounted Adjustable Torque Arm
-1993 - 2002 GM F-Body 3-Point Subframe Connectors- Bolt-In
-1998 - 2002 GM F-Body Torque Arm Relocation Kit - Manual
-82-02 GM F-Body Rear Drag Sway Bar – Stock Rear
-93-02 GM F-Body Solid 35mm Front Sway Bar
-98-02 GM F-Body LS1 Front End Kit- Stage 2(K member/upper/lower arms)
a arms, tourque arm, and rear sway bar are chromeoly
BMR order= about 560 with shipping
-Adjustable Control Arms ( Rod Ends, MTCA003 , Red)
-Bolt-In Control Arm Relocation Brackets ( Red )
-Panhard Rod (Chrome moly, Rod ends, red (MPHR003)
thunder racing order=300 with shipping
-eibach sportline springs
total all together was about $3860.
I'm going to be hurting for a while but it's worth it lol
-
06-14-2010, 07:49 AM #2
- Join Date
- Jan 2009
- Location
- Pa
- Posts
- 137
Hello
Thanks for choosing UMI Performance for your suspension needs. We really appreciate the business. And if you have any questions during the installation process feel free to give me call and I will be more than glad to help.
Thanks
Brad
-
06-14-2010, 09:20 AM #3
UMI are good people! Sounds like some nice pieces you picked up there
-
06-14-2010, 09:34 AM #4
- Join Date
- Aug 2005
- Location
- Thornton, CO
- Posts
- 23,773
Red Tint Jewelcoat- 2008 Trailblazer SS
What made you choose the tranny mounted torque arm with relocation instead of a tunnel braced arm?
-
06-14-2010, 10:15 AM #5
-
06-14-2010, 10:44 AM #6
-
06-14-2010, 12:36 PM #7
- Join Date
- Jan 2006
- Location
- Shepherd, Michigan
- Age
- 36
- Posts
- 11,770
blacker than wesleysnipes- 98' trans am
id say with the suspension pieces he has bought...full front end ..that he is more geared towards handling /autox/road so the longer t/a is preferred ...or maybe to do with the road noise
-
06-14-2010, 12:38 PM #8
- Join Date
- Jan 2006
- Location
- Shepherd, Michigan
- Age
- 36
- Posts
- 11,770
blacker than wesleysnipes- 98' trans am
i like that set up OP..id go for the adjustable upper a arm setup too as everything else is adjustable imho but none the less...it is a solid buy..have fun
-
06-14-2010, 02:07 PM #9
- Join Date
- Feb 2007
- Location
- San Diego, CA
- Posts
- 5,823
2002 Z28 A4 NBM- Sadly now demodded :(
67 Camaro: K-K + 797-z (look it up), 454/Th400/4.10 12-bolt = 6mpg, PS/PDB/PW tilt, tach, gauges...
2005 Corvette LS2/M6 Magnetic Red Metallic (What else would it be?) w/ Cashmere interior
2002 Z28: NBM/Tan, MTI smooth lid, smooth bellows, !AIR, !cats, 1-3/4" QTP SS LT's, 2-1/2" TD's with X-pipe, MagnaFlows dumped at axle, custom welded SFC's, MidWest Chassis body mount adjustable T/A, 3400 stall, 3.23 gears (was 2.73). Tuned: 343rwhp/357rwt (before TD's). Best: 12.559 @ 108+, 1.73 60' @ 3500' DA w/MT ET Street DR's.
Carbon footprint? CLOWN SHOE!
-
06-14-2010, 03:32 PM #10
-
06-14-2010, 09:07 PM #11
Am I missing something....what about shocks? All that work and to still be on stock shocks
┌∩┐(◕_◕)┌∩┐
Man: The Mods you are fighting,
they are the biggest Men I have ever seen. I
wouldn't want to fight them!
Me: That is why no one will remember your name!
-
06-14-2010, 11:17 PM #12
I already have bilsteins on the car. I said in another thread that I was going to order konis when I got the springs but when I started totaling everything up and saw how much everything was going to cost, I cut out the new shocks because it's not entirely necesary at this point
-
06-14-2010, 11:24 PM #13
that's exactly why! infact Im so dead set on using TSP true dual later on that I wasn't even considering relocating the TA but then when I saw the pics from UMI of their build with TSP TD i was sold on the relocation design. I asked BMR if theirs would clear the TSP true dual and they said they couldn't guarantee it would, but they hadn't had any complaints as of yet...... that pretty much made my decision for UMI on that piece pretty easy lol
-
06-14-2010, 11:26 PM #14
-
06-14-2010, 11:31 PM #15
-
06-14-2010, 11:40 PM #16
A drag bar in the back and a big sway bar up front?
-
06-14-2010, 11:40 PM #17
when ever I get to installing this stuff I'll be selling a pair of BMR boxed aluminum, poly LCA's and adjustable poly PHB. their both on the car right now from the previous owner
-
06-14-2010, 11:48 PM #18
I know that's kind of weird and I thought some was going to call me out on this sooner. I like the idea of being able to drop the clutch from a stand still, and haul ass but still be able to handle and take corners. I might have my logic kind of screwy but as far as I know it's not going to hurt anything being set up like that
-
06-15-2010, 12:01 AM #19
-
06-15-2010, 02:58 AM #20
Every suspension part I have on my car is from UMI, they make some good parts. Why did you go with bolt-on SFC?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
finaly got my car lowered
By 2000redcamaro in forum Suspension and HandlingReplies: 24Last Post: 07-15-2010, 10:05 AM -
Finaly ls1
By z28player in forum New Member IntroductionsReplies: 2Last Post: 03-05-2009, 10:44 AM -
Finaly some pics of my WS6
By farmer_ron_99 in forum Appearance SectionReplies: 5Last Post: 12-03-2007, 05:18 PM -
Finaly got me a LS1!
By Quietchaos in forum Camaro / SSReplies: 3Last Post: 03-20-2007, 06:35 PM -
Finaly got my ss to the track
By sunsetorangess in forum Kill StoriesReplies: 3Last Post: 04-09-2006, 05:24 PM
Bookmarks