Bolt Size???

**rll2** · 01-03-2008, 09:59 AM

I need a diagram/picture of the LS1 front brakes. One of the main things I need to see is how the brake line mounts to the caliper, and how the anti-rattle clips fit in the caliper. And thanks for the reply about the bolt. But, that's the bolts head size. Not the bolt size. I got the 12mm bolts. Thanks, Rob

**SexOnWheels** · 01-03-2008, 11:42 AM

Do not have a picture of it but the bolt size (for the front) is 18mm.

**Bottesini** · 01-03-2008, 01:39 PM

Install university has a nice write up on changing the brakes. Should give you a good idea for all you need. (though some of their bolt sizes were off, the pictures and directions were good).

**rll2** · 01-03-2008, 07:30 PM

Thanks, That did show me most of what I was wanting to see. I still would like to see a picture of the hard brake line of someone that has done the LS1 front brake swap to their LT1. It looks to me that I'm going to have to either bend, or cut and reflair the hard lines.

**SexOnWheels** · 01-04-2008, 06:29 AM

Originally Posted by rll2

Thanks, That did show me most of what I was wanting to see. I still would like to see a picture of the hard brake line of someone that has done the LS1 front brake swap to their LT1. It looks to me that I'm going to have to either bend, or cut and reflair the hard lines.

No, all I did was bend the bracket down (where the brake line is braced on the body)

I already had Earl stainless lines the length is fine.