Results 1 to 2 of 2

Is stock clutch enough???

This is a discussion on Is stock clutch enough??? within the Manual Transmission forums, part of the Drivetrain category; I am wanting to do some modifications to my 02 T/A Ram Air, in terms of I want to add ...

  1. #1
    Junior Member
    Join Date
    May 2006

    2002 Trans Am WS6

    Is stock clutch enough???

    I am wanting to do some modifications to my 02 T/A Ram Air, in terms of I want to add a new intake with a 80mm throttle body, 30fps injectors, headers, and I currently have a magnaflow catback system in place. Just want to know if a stock clutch will hold up with the mods I plan on putting in???

    By the way the rest of the engine is stock besides the plugs, k and n filter, and 10mm wires.

  2. #2
    I Fixed Da Rear jimbo98z's Avatar
    Join Date
    Aug 2005
    Raleigh, NC

    Mystic Teal
    1998 Z28 M6

    The clutch should hold.

    Having said that, why upgrade injectors? There are lots of things you can do before you'll need to upgrade those. With the mods I've got (which are somewhat simliar to what you have) and a tune, I'm running less than 80% duty cycle on my stock 28 injectors
    1998 Camaro Z28 M6
    SLP Lid, Flowmaster, Cutout, Spec Stage 3, Pro 5.0 w/ Lou's short stick, Pacesetter Race LT's, Drilled/Slotted Rotors, Hawk HPS pads, Nitto NT555R DR's, Moser 12-bolt with TrueTrac and 3.90s, RPM Speed LCA's and Panhard Bar

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts