Results 1 to 2 of 2
Thread: Master? No pedal pressure
-
05-15-2007, 01:55 PM #1
- Join Date
- May 2006
- Location
- Minnesota
- Posts
- 77
Red- 1987 Trans Am
Master? No pedal pressure
I was driving the other day, pushed in the clutch and gave it a little rev. My car pops out of gear and the pedal goes to the floor! Try as I might, I can't get the car into gear while it is running. I can shift into all of the gears while the car is off however. I have heard some bad things about the Centerforce dual friction clutch, but I have only put about 400 miles on my brand new clutch, master and slave.
I have yet to bleed the system, which I will get done this week. My master is a GM which was prebled, do you still have to bleed the system when hooking up a brand new slave? Anyone have any tips or ideas?
I was driving the other day, pushed in the clutch and gave it a little rev. My car pops out of gear and the pedal goes to the floor! Try as I might, I can't get the car into gear while it is running. I can shift into all of the gears while the car is off however. I have heard some bad things about the Centerforce dual friction clutch, but I have only put about 400 miles on my brand new clutch, master and slave.
I have yet to bleed the system, which I will get done this week. My master is a GM which was prebled, do you still have to bleed the system when hooking up a brand new slave? Anyone have any tips or ideas?
-
05-17-2007, 09:57 AM #2
BLEED IT!!! and also double check and make sure your shifter bolts are tightened down. Also goodluck with the CF I haven't heard of too many ppl having much luck with those. Not even me.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Clutch pedal losing pressure?
By redbird555 in forum Manual TransmissionReplies: 0Last Post: 06-12-2012, 08:43 AM -
Question: Strange Engineering master cylinder pedal ratio
By LT4_ever in forum Firebird / WS6Replies: 0Last Post: 03-29-2011, 10:37 AM -
No Pedal Pressure and Won't go into Gear!
By RudyWS6 in forum Manual TransmissionReplies: 9Last Post: 07-19-2010, 06:36 PM -
No pedal pressure after clutch install
By chevyss1234 in forum Manual TransmissionReplies: 7Last Post: 12-23-2009, 06:23 PM -
pedal wont return after master cylinder change
By Ryans99LS1 in forum DrivetrainReplies: 4Last Post: 08-14-2009, 07:38 AM
Bookmarks