Results 1 to 9 of 9
Thread: Help
-
12-19-2010, 02:21 PM #1
- Join Date
- Oct 2010
- Location
- Bloomfield, Mo
- Posts
- 7
Red- 02 TA
Help
I went from 5.7 to a 6.0 and everytime I get on it farely hard I blow thw slave cylinder. Can some one help me out? What needs to be changed?
-
12-19-2010, 06:06 PM #2
- Join Date
- Apr 2008
- Location
- Madison, WI
- Posts
- 7,006
1999 Formula WS6 M6-sold- 2001 Silverado Z71
What exactly do you mean by "blow the slave cylinder?" Does it literally blow out and leak fluid everywhere and you can't drive the car anymore?
-
12-19-2010, 08:28 PM #3
- Join Date
- Oct 2010
- Location
- Bloomfield, Mo
- Posts
- 7
Red- 02 TA
Yes exactly
-
12-20-2010, 10:51 AM #4
is it poss the clutch is slipping and boiling the fluid to the point of blowing the slave out?
-
12-20-2010, 04:48 PM #5
-
12-21-2010, 06:51 AM #6
- Join Date
- Oct 2010
- Location
- Bloomfield, Mo
- Posts
- 7
Red- 02 TA
I am running a Spec Stage 2 clutch napa master cylinder and going to put a GM slave back in today again
-
12-21-2010, 05:08 PM #7
- Join Date
- Apr 2008
- Location
- Madison, WI
- Posts
- 7,006
1999 Formula WS6 M6-sold- 2001 Silverado Z71
If you were running a Napa slave, that could be part of the problem. The Napa master cylinder could be the second part of the problem.
-
12-24-2010, 05:46 AM #8
- Join Date
- Oct 2010
- Location
- Bloomfield, Mo
- Posts
- 7
Red- 02 TA
I figured out the problem the place that put my engine in left out the pilot bearing.
-
12-24-2010, 05:26 PM #9
- Join Date
- Apr 2008
- Location
- Madison, WI
- Posts
- 7,006
1999 Formula WS6 M6-sold- 2001 Silverado Z71
Interesting...thanks for the update.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks