Page 1 of 4 1234 LastLast
Results 1 to 20 of 67

Feed Back On LS7 Clutch?

This is a discussion on Feed Back On LS7 Clutch? within the Manual Transmission forums, part of the Drivetrain category; so im wondering what everybody has to say about the ls7 clutch kit in our cars.. i hate my centerforce ...

  1. #1
    SICC SYDE Member BlueByU-SS's Avatar
    Join Date
    Sep 2006
    Location
    Concord
    Age
    30
    Posts
    107

    black
    00 ss camaro

    Feed Back On LS7 Clutch?

    so im wondering what everybody has to say about the ls7 clutch kit in our cars.. i hate my centerforce with a passion and ive been looking at the ls7 clutch kit.. Any feedback?
    00 SS TRak CAM,VALVETRAIN,CAI,HOOKER LT'S,3" ORY,CAT DELETE,PCV+EGR DELETE,LS6 MAN.90MM PORTED T/B, ASP UNDERDRIVE PULLEY,LS6PORTED OIL PUMP, FULLY BUILT T56 VIPER TRANNY,MOSER 12 BOLT 3.73'S 33 SPLINE BOLT IN AXELS ALL HOTCHKISS SUSPENSION.,BMR ADJ. TQ. ARM.,SFC'S, E. CUTOUT. 423 rwhp 416 rwTQ.

  2. #2
    Member jbb6811's Avatar
    Join Date
    Nov 2005
    Location
    south carolina
    Age
    37
    Posts
    398

    blue,blue
    00 z-28 m6, 06 H3

    i ordered mine from speed inc and it will be going in on the 27th so if you can hold off for a while i'll post my thoughts on it.
    brandon
    LS7 clutch,01 slave,Corsa 3" stainless exhuast,drilled/slotted rotors + ceramic pads,160 thermo,Mti clear lid,msd 8.5 wires & Ngk plugs...more to come!
    www.cardomain.com/ride/2311455

  3. #3
    Member DaddySS's Avatar
    Join Date
    Oct 2005
    Location
    Bergen Co. NJ
    Posts
    590

    Black
    2000 Camaro SS Conv.

    Lots of folks have them and when installed correctly (like anything else) the reports are very positive. One of the better clutch choices for our cars.

  4. #4
    Member
    Join Date
    Jan 2006
    Location
    mo.
    Posts
    211

    black
    99 camrao

    Put a LS7 clutch sit up in my 99 Have to push the clutch peddle to the floor to get the trany to shift and then it dont shift very good . I even put a new clutch master cyl in and that did not do much good.

  5. #5
    Awaiting Activation
    Join Date
    Mar 2006
    Location
    LS1 land
    Age
    29
    Posts
    1,667
    i just put mine in and i love it. Easy effort and smooth as butter.

  6. #6
    Member jbb6811's Avatar
    Join Date
    Nov 2005
    Location
    south carolina
    Age
    37
    Posts
    398

    blue,blue
    00 z-28 m6, 06 H3

    Hawks third gen did mine and after a 100+ miles i've got to say i like it better then the stocker. its got a lot more feel. soon as i get a little more miles on it i'll but it to the track and see how good it holds.

  7. #7
    Member jbb6811's Avatar
    Join Date
    Nov 2005
    Location
    south carolina
    Age
    37
    Posts
    398

    blue,blue
    00 z-28 m6, 06 H3

    i got to say i love my ls7. it holds great and i've had Zero chatter! so glad i didn't get the Spec!

  8. #8
    Rollo Tomassee AKIRA's Avatar
    Join Date
    Aug 2005
    Location
    Outside the box
    Age
    37
    Posts
    2,887
    I wonder how it measures up to the LS6.

  9. #9
    Junior Member
    Join Date
    Apr 2006
    Location
    ny
    Posts
    17

    arctic white
    2002 ws6 trans am

    ive had my ls7 setup in for about a month now the clutch pedal is more sensitive and responsive i had a spec 3 and didnt really care for it much this setup is way better

  10. #10
    M6 King Hot Black Trans-Am's Avatar
    Join Date
    Mar 2006
    Location
    WI
    Posts
    5,085
    Blog Entries
    1

    09 EclipseGT 75 Chevy 4x4
    2001 Trans-Am 13 F-XT

    I want to do a LS7 in mine too. I'm planning for next spring.

  11. #11
    Member jbb6811's Avatar
    Join Date
    Nov 2005
    Location
    south carolina
    Age
    37
    Posts
    398

    blue,blue
    00 z-28 m6, 06 H3

    as far as i know the ls7 can handle 600-650 hp. it should hold up better then the ls6. and the price isn't much more if any so y not?

  12. #12
    Senior Member NeeD4SpeeD's Avatar
    Join Date
    Sep 2005
    Location
    New York, NY
    Posts
    1,720

    Collectors Edition Yellow
    2002 Pontiac Trans AM WS6

    LS7 huh..... What do the 02 WS6 come with?? Cuz i have 425RWHP and when i put the car under heavy load (drag racing) it wount shift into to 3rd and the petal is at the floor!!! Cuz i was considering the RAM stage 3+ but if the LS7 is cheaper, more responsive and can hold 600-650hp then i will just get that cuz i really need to order 1 like this week!

  13. #13
    Awaiting Activation
    Join Date
    Mar 2006
    Location
    LS1 land
    Age
    29
    Posts
    1,667
    Quote Originally Posted by NeeD4SpeeD View Post
    LS7 huh..... What do the 02 WS6 come with?? Cuz i have 425RWHP and when i put the car under heavy load (drag racing) it wount shift into to 3rd and the petal is at the floor!!! Cuz i was considering the RAM stage 3+ but if the LS7 is cheaper, more responsive and can hold 600-650hp then i will just get that cuz i really need to order 1 like this week!
    '02 WS6 comes with LS6 clutch. The LS7 clutch and matching LS2 flywheel will cost you around $450. I would also get a new GM slave cylinder too. I would definately consider it!! Its a bitchin deal!!

  14. #14
    Senior Member NeeD4SpeeD's Avatar
    Join Date
    Sep 2005
    Location
    New York, NY
    Posts
    1,720

    Collectors Edition Yellow
    2002 Pontiac Trans AM WS6

    Quote Originally Posted by 99blueZ View Post
    '02 WS6 comes with LS6 clutch. The LS7 clutch and matching LS2 flywheel will cost you around $450. I would also get a new GM slave cylinder too. I would definately consider it!! Its a bitchin deal!!
    Sounds like a sick deal, as long as it can handle my future HP from which i hear the LS7 clutch can handle 600-650hp then i think i will buy it!

  15. #15
    King 0f n00bz shady milkman's Avatar
    Join Date
    Jan 2006
    Location
    Shepherd, Michigan
    Age
    29
    Posts
    11,775

    blacker than wesleysnipes
    98' trans am

    Quote Originally Posted by 99blueZ View Post
    '02 WS6 comes with LS6 clutch. The LS7 clutch and matching LS2 flywheel will cost you around $450. I would also get a new GM slave cylinder too. I would definately consider it!! Its a bitchin deal!!
    why does he need a new master/slave?? he has a 02? they have the redesigned hydrolics
    Last edited by shady milkman; 04-15-2007 at 04:46 PM.

  16. #16
    Senior Member NeeD4SpeeD's Avatar
    Join Date
    Sep 2005
    Location
    New York, NY
    Posts
    1,720

    Collectors Edition Yellow
    2002 Pontiac Trans AM WS6

    Quote Originally Posted by shady milkman View Post
    why does he need a new master?? he has a 02? they have the redesigned hydrolics
    So yea then i wouldn't need a master but he said slave so don't i need that?

  17. #17
    Senior Member Hurley711's Avatar
    Join Date
    Jul 2005
    Location
    Earth
    Age
    41
    Posts
    3,362

    414 RWHP 395 RWTQ
    00 Black Ram Air Trans Am

    LS7 LS2 flywheel here with 360+ to the wheels and I like it. A little noisy when idling out of gear but nothing intolerable

  18. #18
    King 0f n00bz shady milkman's Avatar
    Join Date
    Jan 2006
    Location
    Shepherd, Michigan
    Age
    29
    Posts
    11,775

    blacker than wesleysnipes
    98' trans am

    Quote Originally Posted by NeeD4SpeeD View Post
    So yea then i wouldn't need a master but he said slave so don't i need that?
    sorry didnt finish it..no you don't. get a new clutch and change the fluid and you'll be fine.

  19. #19
    Awaiting Activation
    Join Date
    Mar 2006
    Location
    LS1 land
    Age
    29
    Posts
    1,667
    Quote Originally Posted by shady milkman View Post
    why does he need a new master/slave?? he has a 02? they have the redesigned hydrolics
    i didn't say that he needed a new master. I only suggested that he get a new slave. I think its worth $100 now to replace it than have it go out in a year and then you need to drop the trans again. If you ever replaced a clutch on cars you would know that you don't want to have to take the trans out twice.

  20. #20
    King 0f n00bz shady milkman's Avatar
    Join Date
    Jan 2006
    Location
    Shepherd, Michigan
    Age
    29
    Posts
    11,775

    blacker than wesleysnipes
    98' trans am

    Quote Originally Posted by 99blueZ View Post
    i didn't say that he needed a new master. I only suggested that he get a new slave. I think its worth $100 now to replace it than have it go out in a year and then you need to drop the trans again. If you ever replaced a clutch on cars you would know that you don't want to have to take the trans out twice.
    and why would he replace the slave....it was only the 98-00s that had problems..the 01-02 models had a redesigned slave ? so he is going to replace it with the same exact model ?

Page 1 of 4 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Clutch Not coming all the way back up high rpm's
    By Resinblast in forum Manual Transmission
    Replies: 11
    Last Post: 08-11-2014, 08:41 PM
  2. how do i get clutch hydraulic line back in??
    By jmatt07 in forum General Help
    Replies: 8
    Last Post: 10-21-2009, 06:49 AM
  3. need feed back
    By sala in forum Camaro / SS
    Replies: 1
    Last Post: 09-15-2009, 06:10 PM
  4. Hot Rod - Homepage Feed
    By Ed Blown Vert in forum Almost Anything Goes
    Replies: 0
    Last Post: 04-18-2007, 01:30 AM
  5. Back to the Clutch question
    By trainingdragon in forum Drivetrain
    Replies: 0
    Last Post: 03-01-2007, 09:22 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •