Results 1 to 20 of 23
Thread: vss wire
-
11-02-2010, 10:24 AM #1
- Join Date
- May 2009
- Location
- hitchcock, texas
- Posts
- 75
- 1978 280z- ls1-v8
vss wire
I am doing a junk yard swap. Which wire is the vss coming from on the 4l60E tranny. My vss plug was missing. I have a new plug and bothe wires are white. My wires coming from the computer are green and purple.Which is the vss? Is the green wire in the front or the rear of the plug?
Thanks for any help.
-
11-02-2010, 07:36 PM #2
- Join Date
- Apr 2008
- Location
- Madison, WI
- Posts
- 7,006
1999 Formula WS6 M6-sold- 2001 Silverado Z71
Green is terminal A (the rear one) and Purple is terminal B (the front one)
-
11-03-2010, 02:46 AM #3
- Join Date
- May 2009
- Location
- hitchcock, texas
- Posts
- 75
- 1978 280z- ls1-v8
Great. Thanks for the help.
-
11-04-2010, 08:52 AM #4
- Join Date
- May 2009
- Location
- hitchcock, texas
- Posts
- 75
- 1978 280z- ls1-v8
I am trying to wire an electronic speedo from speed hut. It has two wires one for the pulse signal and one for the ground. So which wire sends out the pulse and is the other a ground?
-
11-04-2010, 05:34 PM #5
- Join Date
- Apr 2008
- Location
- Madison, WI
- Posts
- 7,006
1999 Formula WS6 M6-sold- 2001 Silverado Z71
purple is VSS signal and green is the VSS ground.
-
11-05-2010, 03:21 AM #6
- Join Date
- May 2009
- Location
- hitchcock, texas
- Posts
- 75
- 1978 280z- ls1-v8
Thanks. I jacked up the rear end and diconnected the shifter cable and vss. Cable was sticking and vss was wired backwards. Seems like I have forward and reverse but when I put the lever in 1st the wheels just stop like the brakes were on.
-
11-08-2010, 08:34 AM #7
- Join Date
- May 2009
- Location
- hitchcock, texas
- Posts
- 75
- 1978 280z- ls1-v8
I have the rear end jacked up and went thru the gears. I know I have second , third and reverse. But when I put the tranny in first I have to rev the motor pretty high to get the tires to to move.
-
11-09-2010, 03:36 PM #8
- Join Date
- Apr 2008
- Location
- Madison, WI
- Posts
- 7,006
1999 Formula WS6 M6-sold- 2001 Silverado Z71
So you're saying when you put the shifter in the manual 1st gear, the wheels do not spin unless you rev it up? What happens in manual 2nd, Drive, and OverDrive?
-
11-10-2010, 02:53 AM #9
- Join Date
- May 2009
- Location
- hitchcock, texas
- Posts
- 75
- 1978 280z- ls1-v8
I haven`t drove the car yet , my shifter cable wore out on me and a new one should be in today and my gauges are all new so my speedo has to be calibrated. But I can`t tell if 4th is coming in and 1st feels like the brakes are on. As soon as I put it in 1st the wheels stop pretty fast. It is a swap so the computer could be wired wrong. The wiring harness is stock .
-
11-10-2010, 05:43 PM #10
- Join Date
- Apr 2008
- Location
- Madison, WI
- Posts
- 7,006
1999 Formula WS6 M6-sold- 2001 Silverado Z71
Let us know what it does when you are able to drive it. Hopefully it'll all work fine.
-
11-11-2010, 09:03 AM #11
- Join Date
- May 2009
- Location
- hitchcock, texas
- Posts
- 75
- 1978 280z- ls1-v8
The computer had a base tune on it fron G Force in friendswood, texas. I wonder if everything got downloaded for the tranny. But then again, my son and I have no experience on wiring an ls1. So we could have missed something.Once we have everything back together and have not solved the problem, we will take car and all back to circle D and see if they can figure it out.
-
11-12-2010, 12:17 PM #12
- Join Date
- May 2009
- Location
- hitchcock, texas
- Posts
- 75
- 1978 280z- ls1-v8
I am wondering what would happen if I unplug the transmission? What gears would I have? If 1st gear starts working properly than we know it is an electronic problem.
-
11-12-2010, 03:24 PM #13
- Join Date
- Apr 2008
- Location
- Madison, WI
- Posts
- 7,006
1999 Formula WS6 M6-sold- 2001 Silverado Z71
I believe the default is 3rd gear.
Last edited by Cutlass; 11-12-2010 at 05:10 PM. Reason: Removed the misinformation
-
11-12-2010, 05:11 PM #14
- Join Date
- Apr 2008
- Location
- Madison, WI
- Posts
- 7,006
1999 Formula WS6 M6-sold- 2001 Silverado Z71
^^^I corrected/removed the misinformation above.
-
11-19-2010, 03:28 AM #15
- Join Date
- May 2009
- Location
- hitchcock, texas
- Posts
- 75
- 1978 280z- ls1-v8
Thanks for the replies. I took the car to a transmission shop and their computer said that the tranny wasn`t getting the signal for first gear.So what all should I check?
-
11-19-2010, 03:31 AM #16
- Join Date
- Apr 2008
- Location
- Madison, WI
- Posts
- 7,006
1999 Formula WS6 M6-sold- 2001 Silverado Z71
Was there any trouble codes? maybe you have a bad 1-2 shift solenoid???
-
11-19-2010, 06:20 AM #17
- Join Date
- May 2009
- Location
- hitchcock, texas
- Posts
- 75
- 1978 280z- ls1-v8
If I remember what he said , that first gear was getting a signal. I don`t have first or fourth gear. I have disconnected the wiring harness to the trabby and this wekend I will check wire continuity. I really don`t know what else besides the plug that could be causing the problem.
-
11-20-2010, 05:45 AM #18
- Join Date
- May 2009
- Location
- hitchcock, texas
- Posts
- 75
- 1978 280z- ls1-v8
Last post was incorrect. What I meant to say was that first and fourth were not getting a signal from the the computer. I checked the wires yesterday and there was continuity to the wires for first gear shift.
-
11-20-2010, 05:56 AM #19
- Join Date
- Apr 2008
- Location
- Madison, WI
- Posts
- 7,006
1999 Formula WS6 M6-sold- 2001 Silverado Z71
I would look into the 1-2 shift solenoid and its wiring. That solenoid is needed for 1st gear and 4th gear to work. If its unplugged, clogged, or inop you can still have 2nd and 3rd
-
11-20-2010, 08:15 PM #20
- Join Date
- May 2009
- Location
- hitchcock, texas
- Posts
- 75
- 1978 280z- ls1-v8
I checked the wires for 1st to second and second to 3rd and they both show continuity. I rubbed some silicone grease on the plug. Readjusted the new shifter cable and now first is trying to come in again but i have to give it some gas for the wheels to move and as soon as i let off the wheels come to a quick stop. I don`t think fourth is working. My Maf is out. I ordered a new 85mm. Got it in the other day only to find it is a 5 pin. So i ordered an adapter. I am hoping, but don`t believe this is contributing to the transmission problems. Someone wrote that a bad maf can cause tranny problems. I hope it is that simple.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Wire Mod
By kenro23 in forum General HelpReplies: 61Last Post: 05-01-2012, 05:25 AM -
How much wire ?
By stew215 in forum Stereo and ElectronicsReplies: 27Last Post: 01-12-2010, 02:08 PM -
fly by wire
By NEXSTAR7 in forum External EngineReplies: 2Last Post: 06-27-2009, 02:56 PM -
I-wire mod
By CamaroFan71 in forum General HelpReplies: 7Last Post: 03-19-2008, 09:06 PM -
wire mod
By nastyz1 in forum Appearance SectionReplies: 7Last Post: 04-27-2006, 04:40 PM
Bookmarks