manual valve body

**jimjr** · 06-21-2008, 07:03 AM

hi is anyone running a fully manual valve body ? i have a transgo kit to change to fully manual good idea? bad idea? tnanks!!

**performabuilt** · 06-21-2008, 09:54 AM

Originally Posted by jimjr

hi is anyone running a fully manual valve body ? i have a transgo kit to change to fully manual good idea? bad idea? tnanks!!

We have set them up for several customers and they like them , They work well but remember yo will lose all auto control it will start in whatever position you have the shifter in that will be the gear, You can however retain lock if you unplug the two shift solenoids 1-2 and 2-3 toward rear of trans. Plug harness up and have all test codes for those solenoids removed in tuning which is kinda handy

**performabuilt** · 06-21-2008, 09:56 AM

On councellation is that with that kit You can easily switch it back to auto without pulling the valve body if you keep all the parts

**DemonSpeed** · 06-29-2008, 06:43 AM

So you can have full manual control? I thought you couldnt do that with our electronically controlled transmissions. I already have a transgo shift kit in, is there an easy way to do this on mine?

**performabuilt** · 06-30-2008, 08:11 AM

You have t have the transgo 3 kit for full manual control , However bear in mind its means just that NO auto functions if you start in OD you will launch in 4th