3800 stall?

**Ryans99LS1** · 10-25-2007, 10:15 AM

My car supposedly came with a 3800 stall but i find it hard to believe. When you let off the brake, the car creeps on its own and i didnt think it was supposed too with that high of a stall? Plus when im at the line and try to get my rpms up before i launch i can barely get above 1500rpm with out overpowering my brakes. It is certainly stalled though but i just dont think that high. Any way i can check this and find out? anything i can try?

**slims00ls1z28** · 10-26-2007, 04:59 AM

Sounds stock to me. Mine would let me go to almost 2k on stock stall.

**greatwhiteZ28** · 11-10-2007, 07:33 PM

about 1500 on my stock stall

**Ryans99LS1** · 11-11-2007, 02:15 PM

Alright i guess im stock! hah

Well im definitly going to buy one over winter now.

Any input on what stall i should put in or what company makes a good one? I already cracked this converter once and that was VERY pricey to fix, i dont wanna do that again.

**greatwhiteZ28** · 11-11-2007, 02:23 PM

check out fuddle , there a sponser

**ls1speedster** · 11-12-2007, 01:55 PM

with a stall u will be able to drive through it..

i agree u have a stock stall..
but IF it was 3800 when u let ur foot off ur ganna kreep forward anyway it wont hold the car

the car is obvouisly going through the stall stock at 1500 because ur car will move stock with the rpm at idle..

get it...u dont have to get to ur stall before the car will move