will exhaust dumps on left right side sound funny?

[DADillac]

i decided i want to rid my car of any visible exhaust tips. so i cut them as far back as i could, and put in some turn downs, but you can still see the drivers side, so now it just looks like a v6 car. lol

i want to cut them both right after the axle where it splits to two pipe on my slp caback. i attached a picture of where i want to cut and put the turn downs.

my question is will it sound wierd if both pipes are on the same side of the car? i guess GTOs have the pipes next to each other. if it will still sound fine, im gonna chop em tomorrow. it actually sounds better with the turndowns than the SLP tips, little more rumble being under the car i guess.

here is the pic. green lines are where i will cut and install turndowns.

[cammed goat]

Well, if you can pass inspection(if you have them in your state) and are not prone to headaches, then go for it.

[DADillac]

i pass inspection, its all ob2 scan test in IL. will it be any louder than it is now, its still got a muffler on it. i got the dumps now, just have one on each side.

[silverWS6]

It might look a little weird with 2 dumps right there, just cut it before the axle and put 1 dump there?

[Blue28]

It might look a little weird with 2 dumps right there, just cut it before the axle and put 1 dump there?

Yeah, just dump it before the axle, it'll look better!

[SSMuscle]

nice...

[c5z28]

Yeah, just dump it before the axle, it'll look better!

whoa autox much?

[DADillac]

that looks nice, but i dont want to have to weld anything under there. kinda wanted to use existing hangers.

[Blue28]

that looks nice, but i dont want to have to weld anything under there. kinda wanted to use existing hangers.

You can do it with out all the welding that's not a problem.

[silverWS6]

Yeah, just dump it before the axle, it'll look better!

Dont mean to jack the thread but is that a xr1 muffler? or which one is it? any sound clips?

[Goat-E]

whoa autox much?

I agree. Plus the sound reflecting off of the ground is gonna be LOUD inside. I had toyed with the idea of exiting the exhaust on the drivers side just before the rear tire like an old school Can Am setup but the ground clearance seemed a little low. One thing that's nice about routing it out of the drivers side is that you can hear if it's breaking up.

[c5z28]

I agree. Plus the sound reflecting off of the ground is gonna be LOUD inside. I had toyed with the idea of exiting the exhaust on the drivers side just before the rear tire like an old school Can Am setup but the ground clearance seemed a little low. One thing that's nice about routing it out of the drivers side is that you can hear if it's breaking up.

I wish I had that watts linkage he's got
http://www.stranoparts.com/viewfeature.php?FeatureID=2

Are those cobra rims blue28?

[Blue28]

The muffler's a Magnaflow #14419, 3" in/out, 4"dia. x 14" case.

[c5z28]

the muffler's a magnaflow #14419, 3" in/out, 4"dia. X 14" case.

what rims are those?

[Blue28]

what rims are those?

I bought the wheels new back in 1999.
There SSR Integrals, 18 x 9s, that I had Powdercoated NBM.

[Goat-E]

I wish I had that watts linkage he's got
http://www.stranoparts.com/viewfeature.php?FeatureID=2

Are those cobra rims blue28?

No can do here. I need that Harrop (or similar) differential mount. I am running a single 3in exhaust with a Magnaflow 12867 just before the rear cutout. Highflow cats also.

[NavdeepWS6]

whoa autox much?

lol i was going to say the same thing

dont know if i should buy the watts or not, yet since i havnt even been out to a autox event

[Blue28]

lol i was going to say the same thing

dont know if i should buy the watts or not, yet since i havnt even been out to a autox event

The Watts link's good enough to enjoy the benefits even on the street, unless you drive like a little old lady!

[c5z28]

lol i was going to say the same thing

dont know if i should buy the watts or not, yet since i havnt even been out to a autox event

Your rolling in doe aren't you
you and that 91 gas mod of yours