Results 1 to 9 of 9

what lid should i buy?

This is a discussion on what lid should i buy? within the External Engine forums, part of the LSx Technical Help Section category; my stock air box lid is cracking apart. glued it twice since new. fast toys requires a bigger MAF. from ...

  1. #1
    Senior Member Z28_Driver's Avatar
    Join Date
    Jun 2009
    Location
    Ohio
    Posts
    1,017

    Sunset Orange Metallic
    2002 Z28 Hardtop

    what lid should i buy?

    my stock air box lid is cracking apart. glued it twice since new.
    fast toys requires a bigger MAF.
    from what most say i don't need a bigger MAF.
    slp i hear needs adjusted to fit.
    any others that work well?
    my car is an 02 Z28 with a few mods (SSRA, fernco, shift kit)
    looking to hit 450hp eventually.
    any adice on what lid to purchase would be greatly appreciated.

  2. #2
    Ebaaaaaaaaa Speedy_Gonzales's Avatar
    Join Date
    Sep 2006
    Location
    Georgia
    Posts
    11,019

    Black
    2014 Camaro 1LS

    my SLP lid fit just fine

  3. #3
    Member c5z28's Avatar
    Join Date
    Apr 2008
    Location
    Bay Area
    Posts
    8,120

    On your ass flashing
    my highbeams

    Go on ls1tech and buy one used.
    Any od them are all going to work about the same, I had to use a blowdryer on my slp lid to make it fit.

  4. #4
    Senior Member Z28_Driver's Avatar
    Join Date
    Jun 2009
    Location
    Ohio
    Posts
    1,017

    Sunset Orange Metallic
    2002 Z28 Hardtop

    i just ordered an slp lid from new era performance parts.
    i like to get new parts for this car.
    they have the best price i could find including shipping.
    hopefully it gets here quick.

    on a side note: c5z28,
    the SSRA installed with little trouble and it gave the car a better sound and maybe a little performance gain.
    thanks

  5. #5
    Bullet Boy Same ol Situation's Avatar
    Join Date
    Dec 2008
    Location
    Cincinnati, Ohio
    Posts
    156
    2002 CETA m6

    slp lid will fit...with a little fabrication

  6. #6
    Member AB'sLs1's Avatar
    Join Date
    Jun 2008
    Location
    lititz, PA
    Age
    27
    Posts
    228

    red
    1998 Z28

    i got the mti clear lid... looks good and it went right on. check it out....http://www.ws6project.com/user_stor/...oducts_id=1750

  7. #7
    formally 01 T/A 0verkill's Avatar
    Join Date
    Jul 2007
    Location
    San Diego ca
    Posts
    2,253

    "Arrest Me Red"
    2001 trans am

    as in the other 1000 lid post a lid is a lid they all do the same its just where to get it and if you want it in black, carbon, or cleare. some cars will take triming to get it to fit just right but most cars it goes on with no probs. just make sure the frount lip is in the base not over it. what part of ohio are you from?

  8. #8
    Member c5z28's Avatar
    Join Date
    Apr 2008
    Location
    Bay Area
    Posts
    8,120

    On your ass flashing
    my highbeams

    Quote Originally Posted by Z28_Driver View Post
    i just ordered an slp lid from new era performance parts.
    i like to get new parts for this car.
    they have the best price i could find including shipping.
    hopefully it gets here quick.

    on a side note: c5z28,
    the SSRA installed with little trouble and it gave the car a better sound and maybe a little performance gain.
    thanks
    glad it turned out well for you.

  9. #9
    Senior Member Z28_Driver's Avatar
    Join Date
    Jun 2009
    Location
    Ohio
    Posts
    1,017

    Sunset Orange Metallic
    2002 Z28 Hardtop

    Quote Originally Posted by 01 T/A View Post
    as in the other 1000 lid post a lid is a lid they all do the same its just where to get it and if you want it in black, carbon, or cleare. some cars will take triming to get it to fit just right but most cars it goes on with no probs. just make sure the frount lip is in the base not over it. what part of ohio are you from?
    just outside the toledo city limits

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •