Page 1 of 2 12 LastLast
Results 1 to 20 of 30

victor jr intake for LS motors

This is a discussion on victor jr intake for LS motors within the External Engine forums, part of the LSx Technical Help Section category; finally got mine today. started porting it....

  1. #1
    Senior Member mrr23's Avatar
    Join Date
    Jul 2005
    Location
    orlando, fl
    Posts
    7,134

    dark bowling green
    2000 corvette

    victor jr intake for LS motors

    finally got mine today. started porting it.










  2. #2
    Junior Member
    Join Date
    Aug 2007
    Location
    Orlando
    Posts
    19

    White
    98 Camaro

    Are you just port matching or are you porting the runners? Just curious, I just bought the L92 single plane from GM and was wondering if I could take advantage of some portwork or not?

  3. #3
    Junior Member
    Join Date
    Aug 2007
    Location
    Orlando
    Posts
    19

    White
    98 Camaro

    Nevermind, after actually looking at the pics you posted, I answered my own question. Duhh!

  4. #4
    Senior Member mrr23's Avatar
    Join Date
    Jul 2005
    Location
    orlando, fl
    Posts
    7,134

    dark bowling green
    2000 corvette

    i only went about 3-4" deep. i played a little inside the plenum to remove some casting flash at the port openings. i'm not going to get real crazy.

  5. #5
    Senior Member mrr23's Avatar
    Join Date
    Jul 2005
    Location
    orlando, fl
    Posts
    7,134

    dark bowling green
    2000 corvette
























  6. #6
    2004 HEAD/CAM CTS-V 9t8z28's Avatar
    Join Date
    Oct 2006
    Location
    doylestown, Pa
    Posts
    6,818

    SILVER
    2004 CTS-V

    WOW! Nice! What do you have done to the engine so far?

  7. #7
    Junior Member
    Join Date
    Aug 2007
    Location
    Orlando
    Posts
    19

    White
    98 Camaro

    WOW, my 98 camaro is getting a carb with the same type manifold. Looks like I got some cutting to do. Your set up looks good, what cam are you using? Rear? Stall?

  8. #8
    King 0f n00bz shady milkman's Avatar
    Join Date
    Jan 2006
    Location
    Shepherd, Michigan
    Age
    29
    Posts
    11,775

    blacker than wesleysnipes
    98' trans am

    hmmm nice what made you switch rob? also curious on if you where running a fast or a ls6.. looks nice but i cant see that flowing better stock for stock with the elbow it has..looks like it was made for a carb

  9. #9
    Senior Member mrr23's Avatar
    Join Date
    Jul 2005
    Location
    orlando, fl
    Posts
    7,134

    dark bowling green
    2000 corvette

    Quote Originally Posted by 9t8z28 View Post
    WOW! Nice! What do you have done to the engine so far?
    Quote Originally Posted by dvdslw View Post
    WOW, my 98 camaro is getting a carb with the same type manifold. Looks like I got some cutting to do. Your set up looks good, what cam are you using? Rear? Stall?
    http://www.stealthram.com/2000pontiacformula.html

    Quote Originally Posted by shady milkman View Post
    hmmm nice what made you switch rob? also curious on if you where running a fast or a ls6.. looks nice but i cant see that flowing better stock for stock with the elbow it has..looks like it was made for a carb

    wanted to do something different. i was running the NX intake. the intake was designed for carb applications. they made it for EFI as well.

  10. #10
    Senior Member mrr23's Avatar
    Join Date
    Jul 2005
    Location
    orlando, fl
    Posts
    7,134

    dark bowling green
    2000 corvette

    Quote Originally Posted by dvdslw View Post
    WOW, my 98 camaro is getting a carb with the same type manifold. Looks like I got some cutting to do. Your set up looks good, what cam are you using? Rear? Stall?

    i was originally going to go with a 4 barrel 1000 cfm TB, but i need my wipers. here's what you'll have to do to get the carb to fit with an air cleaner.


  11. #11
    Senior Member mrr23's Avatar
    Join Date
    Jul 2005
    Location
    orlando, fl
    Posts
    7,134

    dark bowling green
    2000 corvette
















  12. #12
    2004 HEAD/CAM CTS-V 9t8z28's Avatar
    Join Date
    Oct 2006
    Location
    doylestown, Pa
    Posts
    6,818

    SILVER
    2004 CTS-V

    If you go fast enough, you will not need wipers!

  13. #13
    King 0f n00bz shady milkman's Avatar
    Join Date
    Jan 2006
    Location
    Shepherd, Michigan
    Age
    29
    Posts
    11,775

    blacker than wesleysnipes
    98' trans am

    Quote Originally Posted by 9t8z28 View Post
    If you go fast enough, you will not need wipers!
    i am 100% sure that with the nitrous set up rob is running..he is going fast enough

  14. #14
    Senior Member 01ws6er's Avatar
    Join Date
    Oct 2007
    Location
    The 717
    Age
    30
    Posts
    2,471

    Red
    2001 Trash Can

    Looks nice! Did you have to do any hood or cowl cutting at all? 90mm TB? Friends cousin has pretty much the same setup on his 347 stroker 93 notchback...

  15. #15
    Senior Member 01ws6er's Avatar
    Join Date
    Oct 2007
    Location
    The 717
    Age
    30
    Posts
    2,471

    Red
    2001 Trash Can

    ok I see the section of cowl you cut lol

  16. #16
    Senior Member mrr23's Avatar
    Join Date
    Jul 2005
    Location
    orlando, fl
    Posts
    7,134

    dark bowling green
    2000 corvette

    Quote Originally Posted by 01ws6er View Post
    ok I see the section of cowl you cut lol
    the cowl didn't need to be cut. i did that in prep for the 4 barrel TB i ended up not going with. later on, when i put the nitrous plate under the elbow, i might need the clearance.

  17. #17
    Senior Member mrr23's Avatar
    Join Date
    Jul 2005
    Location
    orlando, fl
    Posts
    7,134

    dark bowling green
    2000 corvette






  18. #18
    King 0f n00bz shady milkman's Avatar
    Join Date
    Jan 2006
    Location
    Shepherd, Michigan
    Age
    29
    Posts
    11,775

    blacker than wesleysnipes
    98' trans am

    Quote Originally Posted by mrr23 View Post
    Click for full size

    Click for full size

    Click for full size
    that pcv pipe is GHETTTO! rob-ghetto-tastic

  19. #19
    Senior Member mrr23's Avatar
    Join Date
    Jul 2005
    Location
    orlando, fl
    Posts
    7,134

    dark bowling green
    2000 corvette

    i'll be painting it with krylon fusion black one day.

  20. #20
    King 0f n00bz shady milkman's Avatar
    Join Date
    Jan 2006
    Location
    Shepherd, Michigan
    Age
    29
    Posts
    11,775

    blacker than wesleysnipes
    98' trans am

    Quote Originally Posted by mrr23 View Post
    i'll be painting it with krylon fusion black one day.
    shit you gotta do what you got to do..let me know if your number improve ect....hows that trans holding up btw?

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. victor headers
    By Resinblast in forum Camaro / SS
    Replies: 2
    Last Post: 04-28-2015, 03:06 AM
  2. Replies: 5
    Last Post: 01-30-2008, 11:20 AM
  3. Edelbrock Victor Stepped Headers
    By xssive in forum Parts For Sale / Trade
    Replies: 3
    Last Post: 04-25-2006, 09:33 AM
  4. Victor cutting torch
    By sg5492 in forum General Classifieds
    Replies: 0
    Last Post: 12-04-2005, 11:29 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •