TSP LT's, TSP ORY, Magnaflow CB

**blackbird0230** · 03-19-2010, 10:41 PM

So I've been in and out of this section asking questions and I finally decided to go with Texas Speed Longtubes, their Off road Y pipe and magnaflow CB.
Well this week has been busy and I just wanted to show my progress.

First package came in, THANKS to RaceProvenMotorsports! they came through on this for me. Arrival: 3/16/10 Ordered: 3/9/10

SIDE BY SIDE COMPARISON

OLD CATBACK BYE BYE

HELLO MISS LADY

Now for the rest. Texas speed Longtubes, Off-road Y
Thanks Texas speed! Shipped 3/17/10. ARRIVAL 3/19/10

The LT's and Y go on tomorrow!!!! Ill post pics and vids if I can later!
thanks for looking

**sjsingle1** · 03-19-2010, 10:58 PM

hope you dont have the problem i had

**sjsingle1** · 03-19-2010, 10:59 PM

http://www.ls1.com/forums/showthread...=131894&page=3

**sjsingle1** · 03-19-2010, 11:03 PM

and the header flange was to low on the num 5 cylinder....could barely put the sprk plug socket on there...same way on num 2 and 4....had to grind them.......and the dip stick tube would not bolt on all the way.....the bolt hit the flange.......grind that also

............BIG HINT......remove the motor mount pedestal to get the header in on drivers side.......took me 2 days to figure that out

**donman** · 03-20-2010, 05:27 AM

lets see some pic's when you are done.. I am curious about how those tips line up...

I have the pacesetter LT, TSP y and that cat-back...I still have some adjustments to do on the catback to get the tips the way I like them...

Don

**LT1 > LS1** · 03-21-2010, 05:55 PM

WOW those tips are big..... a little too big for my taste, but look pretty wild! I'll give ya that!

youll love the way the magnaflow sounds once its broken in. takes about 2 weeks. the sound changes completley.

**Richy_Rich67** · 03-21-2010, 06:18 PM

how about the Y pipe, how did it fit?

**blackbird0230** · 03-21-2010, 08:44 PM

Originally Posted by Richy_Rich67

how about the Y pipe, how did it fit?

Aside from the header install (unbolting motor mounts, lifting motor, etc) The LT's and Catback fit perfectly no problems. The Y, IS a HORRIBLE fit man.

**blackbird0230** · 03-21-2010, 08:46 PM

Originally Posted by LT1 > LS1

WOW those tips are big..... a little too big for my taste, but look pretty wild! I'll give ya that!

youll love the way the magnaflow sounds once its broken in. takes about 2 weeks. the sound changes completley.

I LOVE these tips. I think it fills the whole perfectly IMO. the hard part is adjusting them to center. (not that hard(PATIENCE)).

***SMWS6TA*** · 03-23-2010, 11:25 AM

Originally Posted by donman

lets see some pic's when you are done.. I am curious about how those tips line up...

I have the pacesetter LT, TSP y and that cat-back...I still have some adjustments to do on the catback to get the tips the way I like them...

Don

I have same setup no issues

**sjsingle1** · 03-23-2010, 01:35 PM

so you got the Y in????

**blackbird0230** · 03-23-2010, 02:02 PM

Originally Posted by sjsingle1

so you got the Y in????

No I wished. I called Tsp and he said it should fit so I will try again this weekend, if it still doesnt work I'll have to cut a section out of my mid pipe and re-weld it.

The car is just sitting right now. Headers and the Y. Just for kicks I started it, and It's LOUD! sounds good tho.

I don't have the will to take it to a shop to be charged for a custom fit.

**blackbird0230** · 03-24-2010, 12:48 PM

So since I'm not driving it and I can't connect it to the muffler I decided to throw some zipties to hold it up. I clamped everything down and started it for giggles and to make sure everything is running fine. I got no SES lights yet and note in the video it didn't get reved past 1200 and the camera does no justice on how loud it is

[ame]http://www.youtube.com/watch?v=bpy2NTMcJWI[/ame]

**sjsingle1** · 03-24-2010, 04:02 PM

unless you bang the crap out of it...its not going to fit.......take to muffler shop.......this ORY needs to come with a warning label.......MAY(WILL) NOT FIT